Jump to content

1J7FT26P3NL226764


Fosters
 Share

Recommended Posts

1992 Jeep Comanche base

 

2.5L 2wd, ax-5, Dana 35, LWB

 

No build date because idiot PO rattle canned over it.

 

Phoenix AZ
 

Was forest green, some dingleberry rattle canned it flat black.  Interior is tan and pretty mint.  Manual windows, no sliding rear window.  

 

Status:  It's on the road, passed emissions, it's drivable, but in the process of fixing years of neglect (bushings, shocks, cooling, dents, etc).  Once it's 100% up to date and running well, it'll first get front end swapped to 97+, a new paint job (blue bedliner) and then 4x4 swap with whatever engine I decide on.  Aiming for more of a resto mod almost stock kind of look rather than a hardcore wheeler or anything.  

 

I am the owner. 

270316519_237268771892868_2570149058208568184_n.jpg

1.jpg

4.jpg

Link to comment
Share on other sites

*C1 TRIM STYLE C1 - BENCH SEAT
-Y6 Dark Sand
169 Zone 69-Phoenix
1AA U.S. Dealer Retail
23C Customer Preferred Package 23C
2TC Customer Preferred Package 2TC
3VN Customer Preferred Discount
4HA Special Scheduling Condition I
4M1 Retail to Bid Diversion Tracking
4UA SCA Tissue North America LLC
4XA Air Conditioning Bypass
ALA  
APA Monotone Paint
BAP 75 Amp Alternator
BCC Maint. Free Battery
BGA Power Front Disc/Rear Drum Brakes
CBA Straight Back Bench Seat
CKA Carpets - Floor and Cargo Area
CUM Mini Floor Console
DBB All Manual Transmissions
DDQ 5-Speed Manual Transmission
DMF 4.10 Rear Axle Ratio
DRJ Dana 35 Rear Axle
EPE Engine - 2.5L Power Tech I-4 Cyl.
GAC Tinted Glass Windows
GBB Tinted Windshield Glass
GCB Front Door Tinted Glass
GEC Front Left Side Sliding Window
GRZ Left Remote Mirror
GSZ Right Remote Control Mirror
GTZ Manual Remote Mirrors
HCD Do Not Use - See HCA
HW1  
JAY DO NOT USE - See JP, KA classes
JCA 85 MPH Primary Speedometer
JHA Var Intermittent Windshield Wipers
JJA Cigar Lighter
K3Z STRIPE/BADGE/MOLDING/COLOR
KER  
KWR STRIPE/BADGE/MOLDING/COLOR
LAP Shift Indicator Warning Lamp
LBC Glove Box Lamp
LMA Halogen Headlamps
MB1 Black Front Bumper
MBJ Black Bumper
MDA Front License Plate Bracket
MFF Black Grille
MHA Black Windshield Moldings
MMC Rear Door Solid Window Insert
MMG Belt Moldings
MMK Lower Grille Surround-Painted Silver
NAF High Altitude Emissions
NBK EVAP Control System
NF5 Fuel Tank - 23 Gallon
PG5 Hunter Green Metallic
QG5 Hunter Green Metallic Clear Coat
RAA All Radio Equipped Vehicles
RAF AM/FM Cassette Radio
RCD 4 Speakers
SBA Power Steering
SCG Leather Wrapped Steering Wheel
SFA Standard Duty Shock Absorbers
SGA Rear Shock Absorbers
SUA Tilt Steering Column
TBC Compact Spare Tire
TBM Tire Carrier Winch
TMW Tires
TZA Goodyear Brand Tires
WJN 15" Aluminum Wheels
WLZ All Aluminum Wheels
XBS Pickup Box
YAA Build To U.S. Mkt. Specifications
YEP Manuf Statement of Origin
YGE 5 Additional Gallons of Gas
Z01 Rear Spring Group I
Z1A GVW/Payload Rating
Z56 Left Front Spring Group Vi
Z76 Right Front Spring Group VI

 

 

Build date 4/5/92

Body code TL62

Sold by  KEN GARFF SPARTAN CHRYSLER JEEP, MURRAY UT

Link to comment
Share on other sites

Thanks for the build sheet!  I was looking at the one below (the highest vin number after mine), which is 4 vin numbers behind mine - and that one was built 4/21?  I thought the last digit of the vin was a check digit and thus 22672 vs 22676 would have been in order - 4 vehicles apart... Is that not how it works? 

 

Link to comment
Share on other sites

On 3/10/2022 at 10:30 AM, The86manche said:

Id try cleaning up that rattle can job. Maybe mineral spirits or something similar

Yeah, pressure washer is gonna take a good chunk off, and I'll run it with the wire wheel before then... Gonna aim for a blue bedliner job inspired by this:  https://dirtboundoffroad.com/products/manta-ray-front-winch-bumper-w-pre-runner-hoop-86-01-cherokee-xj-bare-steel?_pos=4&_sid=c3c37a952&_ss=r

Link to comment
Share on other sites

Not exactly. I have run VINs in order in terms of the last 8 and have seen various production dates. Probably what AMC and what everyone else did was manufacture the cars they could get that was say a base model and the higher end models would be built later or even early depending on availability of parts and if it has been customer ordered or not. So while his was made at a later date, yours could’ve had all the parts ready to be assembled vs the other one needing something like a special paint. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...