TheDude Posted June 6, 2021 Posted June 6, 2021 I need the compressor to condensor line for my 88' 4.0 MJ.I believe this is a one year only system, it has a different electric fan, and completely different AC system and I've only seen this setup on multiple 88's.The line I need is a flare nut on tte compressor side and a open hose to a barbed inlet on the condensor. Sent from my iPhone using Tapatalk
TheDude Posted June 6, 2021 Author Posted June 6, 2021 Have you checked Jeepair.com ? No dice.Sent from my iPhone using Tapatalk
TheDude Posted June 6, 2021 Author Posted June 6, 2021 I’m pretty sure I have oneDoes the condensor side end with a hose and a clamp?Sent from my iPhone using Tapatalk
88mjsally Posted June 7, 2021 Posted June 7, 2021 23 hours ago, TheDude said: Does the condensor side end with a hose and a clamp? Sent from my iPhone using Tapatalk Just looked, It doesn’t. Ends in a fitting that screws into the condenser
jdog Posted June 7, 2021 Posted June 7, 2021 On 6/5/2021 at 10:14 PM, TheDude said: I need the compressor to condensor line for my 88' 4.0 MJ. I believe this is a one year only system, it has a different electric fan, and completely different AC system and I've only seen this setup on multiple 88's. The line I need is a flare nut on tte compressor side and a open hose to a barbed inlet on the condensor. Sent from my iPhone using Tapatalk I believe there was two different systems, one dealer and one factory installed. If you can post a picture I bet someone has one laying around
TheDude Posted June 7, 2021 Author Posted June 7, 2021 I'd have to find my old one. But it'll be obvious if it's right as it's the only AC line they used that was just clamped on one end.You're likely right about it being dealer installed but I've only ever seen them on 88's. Four so far to be exact and I'm always looking.If I could remember where I put it I could probably just get one made.Sent from my iPhone using Tapatalk
Recommended Posts