TNT Posted November 8, 2007 Share Posted November 8, 2007 I was just at my friends auto recyclers yard and he has a 90 or so XJ Limited set to go to the crusher next. It has the overhead console it, the complete interior (tan), still has the axles and driveline 4.0 231 case. Should I have him save it? Save it or crush it? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted November 8, 2007 Share Posted November 8, 2007 I was just at my friends auto recyclers yard and he has a 90 or so XJ Limited set to go to the crusher next. It has the overhead console it, the complete interior (tan), still has the axles and driveline 4.0 231 case. Should I have him save it? Save it or crush it? save :D Link to comment Share on other sites More sharing options...
mudrunt Posted November 8, 2007 Share Posted November 8, 2007 tell them to save it. if its decent i would be interested to let my brother fix up and have for a first vehicle. he just turned 16 sunday and is on the prowl for a set of wheels. Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 I can also just get some parts from it. $300.00 whole or let me know what you need. I just talked to him and he won't be crushing it for about a week or so. It has the Jensen factory speakers or at least the door panels with the covers. It also has power windows, locks and mirrors. Link to comment Share on other sites More sharing options...
ridenlow12 Posted November 8, 2007 Share Posted November 8, 2007 Is is a automatic with the shifter on the floor? I would really like one of those. Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 Is is a automatic with the shifter on the floor? I would really like one of those. Auto on the floor, full console, cupholder over the e-brake all complete. Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 It's missing the grill, header, condensor, valve cover, master cylinder and radiator. I think the front bumper and 1 front flare is gone too. Other then that the rest is complete if I remember correctly. Link to comment Share on other sites More sharing options...
mudrunt Posted November 8, 2007 Share Posted November 8, 2007 probably no word on if it ran or not or what is wrong. i would be willing to give 300 whole if i knew it ran or could run with some minor parts Link to comment Share on other sites More sharing options...
ridenlow12 Posted November 8, 2007 Share Posted November 8, 2007 Tell you what if you can get some parts off of it I would like to get the console, shifter and linkage to the tranny! Just let me know $$ if it isnt too much. Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 probably no word on if it ran or not or what is wrong. i would be willing to give 300 whole if i knew it ran or could run with some minor parts I will be pulling my MJ motor which runs good and have all the rest of the parts it would need. I'm swapping in a complete '95 4.0 HO engine, trans and t-case into my MJ. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted November 8, 2007 Share Posted November 8, 2007 probably no word on if it ran or not or what is wrong. i would be willing to give 300 whole if i knew it ran or could run with some minor parts I will be pulling my MJ motor which runs good and have all the rest of the parts it would need. I'm swapping in a complete '95 4.0 HO engine, trans and t-case into my MJ. speaking of which, Tim what would you want for that 4.0? the PO of that truck will be in need of a new motor (well, all sorts of seal replacement) and I figure throwing in a different motor that doesn't leak is easier. Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 speaking of which, Tim what would you want for that 4.0? the PO of that truck will be in need of a new motor (well, all sorts of seal replacement) and I figure throwing in a different motor that doesn't leak is easier. That depends... I could use help to swap motors and such. Link to comment Share on other sites More sharing options...
dfreeman616 Posted November 8, 2007 Share Posted November 8, 2007 i may be interested in the overhead console, is it the full length one or just the computer by the visors? also, i'm looking for the weather strip on the bottom outside of the driver's window where it goes into the door. so if you're going to be pulling some things off it...oh yea, i also need a complete lock set for the doors (including hatch release button/lock assembly) Link to comment Share on other sites More sharing options...
TNT Posted November 8, 2007 Author Share Posted November 8, 2007 i may be interested in the overhead console, is it the full length one or just the computer by the visors? also, i'm looking for the weather strip on the bottom outside of the driver's window where it goes into the door. so if you're going to be pulling some things off it...oh yea, i also need a complete lock set for the doors (including hatch release button/lock assembly) It's the full length one. I'll have to see how my back feels on monday. Thats the day I'm going there to get my parts. Make a list of what you need and what you'll pay. I'll see what I can do Link to comment Share on other sites More sharing options...
Eagle Posted November 8, 2007 Share Posted November 8, 2007 Definitely save Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now