Which Light Bar Do You Have?

[comanchefest]

Trying to figure out a good size for the light bar on the front of my Jeep, on the bumper. The grill is 37" wide, don't want to go much wider because it would block the signals. I'm a big fan of the site at the link below, I've purchased many bars from them. Just installed a 20" in the lower grill of my '14 F150. 

 

Whattya think of this one? 

https://www.superbrightleds.com/moreinfo/off-road-led-light-bars-straight-and-curved/30-inch-off-road-led-light-bar-90w/3671/

 

 

[Pete M]

I found mine on ebay for about half that site  

[rylee144]

Mine is 20 inches or so. Paid under 50 if I remember right. Came with all the wiring and switch. Plenty bright 

[SuperSwede]

Why don't go for a proper light ?

4 x 55W xenon does the work

 

[Pete M]

that's an impressive amount of projection    

[SuperSwede]

Correct, performance enough for anyone.

If you want to you can read a paper standing 500m from the truck in the  pitch dark night.

 

 

[comanchefest]

LOL, I prefer bars and LED, because reasons. 

[DesertRat1991]

On 2/19/2020 at 9:47 AM, comanchefest said:

Trying to figure out a good size for the light bar on the front of my Jeep, on the bumper. The grill is 37" wide, don't want to go much wider because it would block the signals. I'm a big fan of the site at the link below, I've purchased many bars from them. Just installed a 20" in the lower grill of my '14 F150. 

 

Whattya think of this one? 

https://www.superbrightleds.com/moreinfo/off-road-led-light-bars-straight-and-curved/30-inch-off-road-led-light-bar-90w/3671/

 

 

 

Looks like it would work.  The stock bumper is curved and the contour is a good match for a 25-30" curved light bar.  

[AZJeff]

On 2/20/2020 at 4:04 PM, SuperSwede said:

Why don't go for a proper light ?

4 x 55W xenon does the work

 

When you turn those on, I bet the engine stalls due to the load on the alternator