Jump to content

small parts Identification (center console?)


Recommended Posts

after removing center console on my 94 xj I found these 3 nylon pieces. 2 look like screw retainers and the other looks like a bushing. I not entirely sure if they came from the center console, and can't seem to find anything that they will fit.

I have poured over illustrations and parts manuals and can't find any references that help. I was hoping someone here will recognize these parts and tell me what they were used for.

getting ready to put everything back together.  thanks

 

1994 xj 2 door, 2wd, 6cyl, at, dealer installed cc, ac

 

1296664694_bushingxj.jpg.d9a3d50a49fa23a42395325d90c4324c.jpg1766517129_retainerxj.jpg.62cdda2c01d0a021cd9d7c3f9f17bb67.jpg

Link to comment
Share on other sites

The bottom two look like the caps the factory used to put over the idle mixture and idle speed adjustment screws on carburetors. The caps were supposed to prevent owners from trying to adjust the carbs.

 

The upper bushing looks vaguely familiar, but I'm drawing a blank on where I might have seen its twin.

Link to comment
Share on other sites

2 hours ago, schardein said:

Those parts are not a part of the center console or its installation.

 

I found the 2 same pieces in the trim section. there used in the upper trim/ headliner as spacers somewhere, they just show the part but not where. shouldn't be to hard to figure out

I don't like to have parts left over! it drives me crazy. still haven't found the bushing looking part yet. 

17 5500 2520 2 72            SPACER, Headliner/Side Rear Moulding. used in 2 door xj only. 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...