Cmorris24 Posted March 24, 2018 Share Posted March 24, 2018 Ok so I have searched but haven't gotten solid answers. I just want to have the rear and inch or 2 higher so when I do the front it's level. From experience has anyone done the chevy lowering shackle swap and had adverse effects to handling or pinion angle etc. Truck is not really gonna be a wheeler mainly for looks and mild trails. I put some jk wheels and tires on so I just need a to lift a tad to remove rubbing. Just don't want to waste time and money. If she will drive down the road and do some light wheeling I'll be happy. Thanks Link to comment Share on other sites More sharing options...
Eagle Posted March 24, 2018 Share Posted March 24, 2018 Before you do anything -- where is it rubbing, and how much? Link to comment Share on other sites More sharing options...
Cmorris24 Posted March 24, 2018 Author Share Posted March 24, 2018 Lower fender. I'm kinda opposed to trimming on this one too. Link to comment Share on other sites More sharing options...
Eagle Posted March 25, 2018 Share Posted March 25, 2018 4 hours ago, Cmorris24 said: Lower fender. I'm kinda opposed to trimming on this one too. Front or rear? Going straight, or turning? In front of wheel or behind? Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 25, 2018 Share Posted March 25, 2018 17 hours ago, Cmorris24 said: Ok so I have searched but haven't gotten solid answers. I just want to have the rear and inch or 2 higher so when I do the front it's level. From experience has anyone done the chevy lowering shackle swap and had adverse effects to handling or pinion angle etc. Truck is not really gonna be a wheeler mainly for looks and mild trails. I put some jk wheels and tires on so I just need a to lift a tad to remove rubbing. Just don't want to waste time and money. If she will drive down the road and do some light wheeling I'll be happy. Thanks Assume you used adapters for the JK wheels that pushed the tires out into the fender? Link to comment Share on other sites More sharing options...
Cmorris24 Posted March 26, 2018 Author Share Posted March 26, 2018 Yea 1.25 inch adapters. It's not terrible rub I just mainly wanted to know who uses the shackles and how they treated them. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 26, 2018 Share Posted March 26, 2018 Assume you still have your original 30+ year old sagged-out rear leaf springs too? The "chevy lowering shackle swap" is a cheap temporary band-aid attempt to restore OEM ride height. To do it right, replace the tired rear springs and it'll jack it up an inch or three. Then use fresh coils and spacers up front to level it up. Link to comment Share on other sites More sharing options...
Cmorris24 Posted March 26, 2018 Author Share Posted March 26, 2018 No springs aren't saggy the front sits to low just want the year to match the front when I lift it. I don't need much. Truck was babied, only 100,000 miles too so. But anyhow seems I just gotta order leaves or do a bastard pack because shackles are a no no correct? Link to comment Share on other sites More sharing options...
Cmorris24 Posted March 26, 2018 Author Share Posted March 26, 2018 I also understand the leafs are still 30 years old just staying that they are far from saggy. Link to comment Share on other sites More sharing options...
DirtyComanche Posted March 26, 2018 Share Posted March 26, 2018 Getting an inch or so out of shackles isn't a big deal. And if you only need that much it is the easiest thing to do. Personally I'd probably add a leaf from a S10 (or similar) though because I find the stock MJ springs are a little softer than ideal. Where is it actually rubbing? You never answered, but I'm assuming it's the rear lower part of the front fender? You might be able to fix that somewhat with adjustable control arms or shims. Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 26, 2018 Share Posted March 26, 2018 10 hours ago, Cmorris24 said: I also understand the leafs are still 30 years old just staying that they are far from saggy. All leaf springs sag over time. Do THIS to see how it compares to factory ride height when new. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now