hakukamana Posted October 14, 2017 Posted October 14, 2017 Looking for a Cargo light for the eliminator bed, also the plastic end caps for the stock bumper. Thanks
Master7122 Posted October 18, 2017 Posted October 18, 2017 If you needed the front I had some extras but don’t think I have rears
schardein Posted October 18, 2017 Posted October 18, 2017 I think I have a rear end cap, can't remember which side, the molded in metal stud is broken. If you are interested I could post a pic later.
hakukamana Posted October 18, 2017 Author Posted October 18, 2017 Thanks for the replies guys. Schardein if you have a RH rear thats what I need. If you can post a pic it would be greatly appreciated. Its for the Eliminator, the bumper needs to be reworked kinda banged up but it all there except the RH end cap, also the license plate light cover, LH side black, that covers the clear lamp lens.
schardein Posted October 18, 2017 Posted October 18, 2017 My gut is saying its a left, but will confirm tonight. And I may have a license plate light cover. I think they are the same left and right?
hakukamana Posted October 18, 2017 Author Posted October 18, 2017 Thanks the difuser, might just need to be filped for rh or lh. I am hoping its a right.
schardein Posted October 19, 2017 Posted October 19, 2017 My end cap is a left (driver side). Sorry. I didn't have time to look for the license plate light lens. I should be able to tomorrow.
hakukamana Posted October 19, 2017 Author Posted October 19, 2017 No worries, thanks for checking. I've learned just be patient, or improvise......
DesertRat1991 Posted October 19, 2017 Posted October 19, 2017 20 hours ago, hakukamana said: No worries, thanks for checking. I've learned just be patient, or improvise...... The license plate lenses seem pretty generic. Your local Autozone or NAPA might have an adequate replacement: http://www.autozone.com/collision-body-parts-and-hardware/license-lamp-lens/dorman-license-lamp-lens/804803_4158_0 The tricky part might be finding the spring clips that hold them in place.
hakukamana Posted October 20, 2017 Author Posted October 20, 2017 Rat, perfect those are the housings for the factory bumper. I have the spring clips from the original assemblies. But it is exactly the same part. Thanks for the link. Now I just need to find the end cap for the bumper.
Recommended Posts