JeepFanactic Posted February 16, 2017 Share Posted February 16, 2017 Need input on 1988 Mj 2wd with the 4.0 and manual transmission. The body is pretty straight from what I can tell. But the interior on the drivers side is pretty rotted out. The owner told me to take it off his hands for $700. I am in the middle of a 4wd conversion on my current MJ so I am aware of what is needed to get it converted but I have never welded before. This MJ would be a way to learn to weld on and a just something else to learn on. Need suggestion on if I should pass or not. Its fairly close to home so that is not a problem. Thanks Link to comment Share on other sites More sharing options...
DirtyComanche Posted February 16, 2017 Share Posted February 16, 2017 I'd probably buy it and park it in the line of all the other Jeeps that need attention. YMMV Link to comment Share on other sites More sharing options...
Keyav8r Posted February 17, 2017 Share Posted February 17, 2017 If you have $700 and a place to park it, grab it. If I learned to weld you can. Link to comment Share on other sites More sharing options...
Skorpyo Posted March 1, 2017 Share Posted March 1, 2017 Agreed, if you have the space and the jeep runs and doesn't sound like it needs a new motor. I'm in northern VA (Woodbridge) and my buddy and I have done some floor board welding before if you're looking for tips etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now