87 4.0 Vacuum Harness

[FLETCH14519]

I was searching around to find a good part number for the front and rear vacuum line harness for my 87 4.0 Comanche. From what I found, the 715-1366 and 715-1367 (NAPA NUMBERS) will not work with the 87's due to certain hoses not reaching or lining up? Does anyone know a good part number for the 87's Vacuum line assembly (front and rear)? I did find a good CROWN P#: 53004375 , but looking for the other half for the full assembly.

[Crash]

I'll see if I can find it. But I know there's at least one thread on naxja. Probably here too.

[jerpderp]

I used NAPA harnesses on my 87. Worked fine. Not a perfect fit but pretty close.

 

 

Sent from my iPhone using Tapatalk

[FLETCH14519]

I'll see if I can find it. But I know there's at least one thread on naxja. Probably here too.

Okay sounds good. Thank you

[FLETCH14519]

I used NAPA harnesses on my 87. Worked fine. Not a perfect fit but pretty close.

Sent from my iPhone using Tapatalk

 

is everything still hook up like it should? Was there any modifications?

[jerpderp]

The two main vac harnesses Hooked up as they should. The routing wasn't as perfect as the factory, but they work with no leaks. The line from the rear of the valve cover to the intake manifold wasn't close, so I reused the stocker.

 

 

Sent from my iPhone using Tapatalk

[jerpderp]

I have an engine photo in my build thread

 

 

Sent from my iPhone using Tapatalk

[cruiser54]

It's all right in the link below.

http://cruiser54.com/?p=121

[Whiz]

I got mine on Amazon

 

https://www.amazon.com/gp/product/B000630DJ4/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B000630DJO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1