willi2ds Posted January 11, 2015 Posted January 11, 2015 I'm going to replace the BJ's soon and have been reading through several posts. Most people seem to recommend the Spicer/Dana ones for stock applications and I know Synergy is at the other end of the equation (but $$$), MOOG has gone downhill. What are the lifted/modified guys running with offset rims and larger tires running? I've looked at XRF, Alloy USA but could use some insight on what's been working
Blue XJ Posted January 11, 2015 Posted January 11, 2015 I'm running Spicers. I've tried Moog and TRW, ended up going back to Spicer.
ftpiercecracker1 Posted January 11, 2015 Posted January 11, 2015 Currently running XRF units and so far so good. My truck gets worked pretty hard and so far they have held up very well. Approx 5k since install.
HOrnbrod Posted January 11, 2015 Posted January 11, 2015 I have a NOS set of Mopar upper and lower Mopar ball joints I have not installed yet. But they are actually Dana Spicer products. The p/n below on the plastic bag (701059X) is a Dana Spicer number. That number is also stamped on the ball joint itself. So yeah, go with Spicer. Image Not Found Image Not Found
91Pioneer Posted January 11, 2015 Posted January 11, 2015 Spicer http://www.amazon.com/gp/aw/d/B007N6OHI0/ $39 per pair
willi2ds Posted January 11, 2015 Author Posted January 11, 2015 Ftpiercecracker1- Were those XRF ones as tight as everyone says before they broke in? Read some scary stories about them when first installed.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now