daking Posted November 3, 2014 Share Posted November 3, 2014 I put together a few parts to allow 3 hoses vent. Transmission, Transfer-case, and Front Diff. Feed to a distribution block, with a small filter. Mounted high up on the firewall. Image Not Found Link to comment Share on other sites More sharing options...
Jeep Driver Posted November 3, 2014 Share Posted November 3, 2014 That's cool. Link to comment Share on other sites More sharing options...
87Warrior Posted November 3, 2014 Share Posted November 3, 2014 I like it. Any reason you didn't tie it into the intake tube right there? I assume you have a filter in the cowl. Link to comment Share on other sites More sharing options...
daking Posted November 3, 2014 Author Share Posted November 3, 2014 I thought about connecting to the intake instead of a stand alone filter. I decided its best with a stand alone filter. Connecting to the intake tube would apply a small vacuum to vent hoses. Giving the parts a slight negative air pressure. If there are any small leaks in any part, small amounts of dust or water would be pulled in over time. So, I decided on a dedicated filter. Link to comment Share on other sites More sharing options...
Incommando Posted November 3, 2014 Share Posted November 3, 2014 You can get the little white factory breather caps for about $2 each if someone wants options. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now