mpace6a Posted February 18, 2013 Share Posted February 18, 2013 So I was thinking about it while modifying a ranger rear bumper to fit my mj until I find a design i like to fab one, and got to wondering how many vehicles have sacrificed parts to make your mj what it is today? As of right now, mine has parts from 3 mjs, 4 or 5 xjs, an s10, an s15, a blazer, a dodge ram, a ford ranger, a kubota tractor, and a washing machine. Link to comment Share on other sites More sharing options...
johnny quest Posted February 18, 2013 Share Posted February 18, 2013 washing machine?! we need more info on that one!! mine has: front axle from a 1989 f350 rear axle from a 2004 chevy 2500hd master cylinder from a ford e350 transmission from a different 88MJ t-case from a YJ (i think) wheels from an H2 Link to comment Share on other sites More sharing options...
mnkyboy Posted February 18, 2013 Share Posted February 18, 2013 http://comancheclub.com/topic/26441-what-non-mj-parts-are-installed-on-your-rig/ Link to comment Share on other sites More sharing options...
mpace6a Posted February 18, 2013 Author Share Posted February 18, 2013 yep, had one we were scrapping, part of the metal made a bracket for an electric fuel pump, and part of its wiring now wires my fuel pump! also, it makes people as questions ;) Link to comment Share on other sites More sharing options...
JeepComanche89 Posted February 19, 2013 Share Posted February 19, 2013 Hmm, I'm probably going to miss alot but I'll try my best. 2 MJ's, 3 XJ's, an exploder, and a grand. probably more, but i don't know. Link to comment Share on other sites More sharing options...
Dirteatr717 Posted February 19, 2013 Share Posted February 19, 2013 2 dr XJ buckets and 5spd center console XJ Or-Fab rear bumper 78 f250 dana44 front axle Late 60s f250 dana60 full float rear axle 2 pieces of wooden dowels to hold up my headliner and sunglasses That's about it, I took out the ORIGINAL Floor mats last week because my foot finally wore through em hahahaha Link to comment Share on other sites More sharing options...
jeepsouth Posted February 19, 2013 Share Posted February 19, 2013 I modified a toyota sienna reciever hitch to fit my mj, cig. lighter from an xj, add on wiper delay (mounts to bottom of dash panel) originally for an xj. Link to comment Share on other sites More sharing options...
Mountain Dude Posted February 19, 2013 Share Posted February 19, 2013 So far...just XJ floor mats adjustable mirrors and interior door panels and S-10 leather bucket seats. Soon the be the rest of the grey XJ interior pieces that fit, the front axle and the 4.3 / 4L60 / NP231C and wiring from the S-10. Link to comment Share on other sites More sharing options...
Garvin Posted February 20, 2013 Share Posted February 20, 2013 Front and rear axles are from an '89 F350 Chevy block is from a '93 Chevy 1500 Wiring is from an '88 Camaro Intake setup is from a '91 Camaro Bell housing is from a '79 Camaro Clutch is from an '86 Camaro AX15 and NP231 are from a '92 Comanche Front drive shaft is from a '94 Cherokee Clutch slave is from a '79 CJ Steering box and pitman arm are from a '99 WJ Brake master is from a mid-70's Grand Marquis Seats are from a ZJ I'm sure I'm missing some parts but that's all that I can remember off the top of my head. Link to comment Share on other sites More sharing options...
Dadinator Posted February 20, 2013 Share Posted February 20, 2013 Apparently you've never read my sig... Link to comment Share on other sites More sharing options...
mpace6a Posted February 20, 2013 Author Share Posted February 20, 2013 Apparently you've never read my sig... on my phone so can't be positive...but I'm reasonably sure your sig was the inspiration to tally up what all has gone into mine, and then got me wondering about everyone elses EDIT Just got on the computer, and it was yours! Link to comment Share on other sites More sharing options...
dasbulliwagen Posted February 21, 2013 Share Posted February 21, 2013 XJ Wagoneer- grille assy, power antenna, power windows, power locks, power mirrors, clock, cig lighter, radio XJ country- sway bar, wheels, front skid plate, transfer case skid, chromed front and rear bumpers JK Wrangler- front and rear shocks WJ Grand Cherokee- electric fan assy Mazda 3- cold air intake assy. (modified) Dodge Journey- Power steering resevior Generic shelf brackets modified to support P/S resevior, and cold air intake Link to comment Share on other sites More sharing options...
Dadinator Posted February 21, 2013 Share Posted February 21, 2013 on my phone so can't be positive...but I'm reasonably sure your sig was the inspiration to tally up what all has gone into mine, and then got me wondering about everyone elses EDIT Just got on the computer, and it was yours! :thumbsup: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now