ride172 Posted January 12, 2013 Share Posted January 12, 2013 I'm looking into buying a hitch for my 88 long bed. Guy on the phone said it's a class III hitch. He said the only decal he could find on it said Easy Hitch (or maybe EZ hitch). He also said it mounts to the bottom of the frame rails. I'm pretty sure it came from a 'manche because the stock number they had on it was mj4470 and a guy who pulls parts said it came off a long bed. Has anyone heard of Easy Hitch (EZ hitch)? Also those of you that have a long bed hitch, does it mount to the bottom of the rails? I want to get the right one. Thanks in advance. Link to comment Share on other sites More sharing options...
terrawombat Posted January 12, 2013 Share Posted January 12, 2013 Drawtite, U-Haul and Husky are the three that I have personally seen, but there may be others. A quick search of EZ-Hitch turns up some results and it wouldn't surprise me if there were a bunch of small-time shops trying to get in the game back in the day. There was a time, after all, when Jeep was producing tens of thousands of these trucks... Link to comment Share on other sites More sharing options...
ride172 Posted January 12, 2013 Author Share Posted January 12, 2013 The results I get from Google are for an alignment device used for backing up to the trailer. Also some for a height adjusting draw bar. Nothing for an actual receiver. Link to comment Share on other sites More sharing options...
terrawombat Posted January 12, 2013 Share Posted January 12, 2013 Well, it certainly looks like EZ-Hitch is in the truck receiver business. Maybe they're not making receivers anymore...maybe it's not even the same company. But I just reread your original post. No receiver that I have seen for the MJ mounts to the bottom of the frame rails. Sounds like it came from a XJ or ZJ. Link to comment Share on other sites More sharing options...
jimoshel Posted January 12, 2013 Share Posted January 12, 2013 Remind me in the morning. I've got a EZ hitch that I took off a MJ. Seems like it had both the bottom and side mount. To dark an cold to go look now. And I do have a couple hitches I removed from a MJ, only mounted on the bottom. Think they're Draw tite. Link to comment Share on other sites More sharing options...
desertmike Posted January 12, 2013 Share Posted January 12, 2013 EZ hitch was a player some time back. Mine is a Smitty Bilt tube with receiver built in and only good for about 2500 lbs or so. It mounts to the frame rail sides and maybe bottom. Can look tomorrow. But there is no way in hell that an MJ is gunna pull a class lll trailer. Link to comment Share on other sites More sharing options...
ride172 Posted January 12, 2013 Author Share Posted January 12, 2013 I just realized I left the word "heard" out of the title. Also I just read a thread here that mentions a company called EAZ lift hitch. Maybe that is what the guy meant. Thanks Jim, I would really appreciate that. I saw a red MJ southbound on I25 south of Pueblo a couple weeks ago on my way home from the Grand Canyon. It kinda looked like you but hard to tell across a median. I waved like crazy. Link to comment Share on other sites More sharing options...
jimoshel Posted January 12, 2013 Share Posted January 12, 2013 You went thru and didn't stop by? What do you think I keep the coffee pot on for? Wasn't me. Haven't had the Red MJ out for maybe a month. There is a Red one running around town. Haven't been able to meet the owner yet. Link to comment Share on other sites More sharing options...
ride172 Posted January 12, 2013 Author Share Posted January 12, 2013 Desertmike, I'm going to be pulling my boat with my mj. It is a 19' fiberglass with a good solid trailer on a single axle. I towed it all summer with my xj with 4.0, aw4, 3.55 gears. The xj stopped everything pretty good. In emergency stops I would sometimes have to pull the hand brake a little. My mj has 4.0, aw4, 4.10 gears and an AMC 20 in the rear. I'm looking to upgrade my springs as well. The bigger drums on the 20 should help slow things. I don't know if my boat/trailer combo is considered class III or not but I know my mj will be capable of pulling and stopping it. I only tow it about 30 miles each way. I love snowboarding more than anything besides my daughter but I'm getting anxious for spring and that first trip to the lake. Link to comment Share on other sites More sharing options...
ride172 Posted January 12, 2013 Author Share Posted January 12, 2013 I'll make it down to see you sometime Jim. Men like you with so many good stories and life experiences to back them up are rare. It would be an honor to shake your hand and BS for a while. Link to comment Share on other sites More sharing options...
jpnjim Posted January 12, 2013 Share Posted January 12, 2013 Think it could be Eaz-Lift? Seems to be a good company, I started a thread on them as a possible MJ hitch source here; http://comancheclub.com/topic/36456-looking-for-an-mj-hitch-anyone-try-eaz-lift-yet/ Link to comment Share on other sites More sharing options...
jimoshel Posted January 12, 2013 Share Posted January 12, 2013 Apparently I was wrong. The two hitches I thought was from a MJ was from a XJ. Somehow they got in my MJ pile and I never noticed. With only two mounting holes, one in each rail, there is no way to safely install a bottom mount only hitch on a MJ. I do have one receiver hitch that came off a MJ that used the two frame rail holes but it was also bolted up to the bumper. Link to comment Share on other sites More sharing options...
ride172 Posted January 13, 2013 Author Share Posted January 13, 2013 Thanks for looking for me Jim. I'm gonna have them mail me some pictures on Monday. The price is $100 shipped. They seem sure it came off a mj. Link to comment Share on other sites More sharing options...
fiatslug87 Posted January 13, 2013 Share Posted January 13, 2013 There are MJ hitches for the long bed that mount under the frame rails, I have one made by Hidden Hitch on my '89 LWB. Link to comment Share on other sites More sharing options...
jimoshel Posted January 13, 2013 Share Posted January 13, 2013 All things considered, I believe the best, cheapest and most practical way to go would be to take a XJ hitch, fabricate the two end plates like the factory and drawtite and uhaul made and weld them to the XJ hitch. My 2 cents worth. Link to comment Share on other sites More sharing options...
oldskool023 Posted April 25, 2013 Share Posted April 25, 2013 I have a custom hitch made for a long bed that I don't need I though it would fit my shortbed if anyone is interested pm me Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now