Zebvance Posted October 17, 2012 Share Posted October 17, 2012 I have a custom made drive shaft that came on my comanche when I bought it. It's was to short for my lift still, so I just did a sye and had a new Tom wood drive shaft made. So now this one is up for sale to recoup some of the cost. Specs: 41 1/2 inches from center to center. It is Aluminum Takes 1310 ujoints I believe. I believe it would be perfect for a auto 4x4 comanche with about 4.5 inches of lift. I highly suggest measuring to see the length you need first. 100$ plus shipping obo If you have any questions or want more measurements please ask. Link to comment Share on other sites More sharing options...
mvusse Posted October 17, 2012 Share Posted October 17, 2012 Going by the length my memory tells me my stocks lwb driveshaft was, 41.5" should be correct for a 4.0/auto swb without any lift. Link to comment Share on other sites More sharing options...
Zebvance Posted October 17, 2012 Author Share Posted October 17, 2012 Thanks for the info! Link to comment Share on other sites More sharing options...
Zebvance Posted October 18, 2012 Author Share Posted October 18, 2012 Any interest? Offers? Link to comment Share on other sites More sharing options...
Alexia Posted October 18, 2012 Share Posted October 18, 2012 Any interest? Offers? I am interested like I said in the other topic, but I will not know the final drive shaft length until towards the end of this month or possibly into next. So if it is still available then I will gladly take it assuming it is the correct length! Link to comment Share on other sites More sharing options...
Zebvance Posted October 19, 2012 Author Share Posted October 19, 2012 I am interested like I said in the other topic, but I will not know the final drive shaft length until towards the end of this month or possibly into next. So if it is still available then I will gladly take it assuming it is the correct length! Ok! What size lift are you going to run. Also what engine and tranny do you have and is it a long or short bed? Link to comment Share on other sites More sharing options...
Alexia Posted October 19, 2012 Share Posted October 19, 2012 Ok! What size lift are you going to run. Also what engine and tranny do you have and is it a long or short bed? 4.0, AW4, NP231, SWB, D44 rear, 5.5" lift. The transmission and transfer case are on the floor, the engine block is at the machine shop. :P So once I have it all reinstalled in a couple weeks I will have a better idea on getting a measurement. Link to comment Share on other sites More sharing options...
Zebvance Posted November 7, 2012 Author Share Posted November 7, 2012 Bump Link to comment Share on other sites More sharing options...
Zebvance Posted December 2, 2012 Author Share Posted December 2, 2012 I'm getting tired of this thing sitting around guys. make me a offer Link to comment Share on other sites More sharing options...
Wrz Posted December 2, 2012 Share Posted December 2, 2012 Pm sent Link to comment Share on other sites More sharing options...
Zebvance Posted December 5, 2012 Author Share Posted December 5, 2012 Boxed up and ready to ship. Still available. Link to comment Share on other sites More sharing options...
Zebvance Posted December 10, 2012 Author Share Posted December 10, 2012 To the top Link to comment Share on other sites More sharing options...
Zebvance Posted December 18, 2012 Author Share Posted December 18, 2012 need this gone Link to comment Share on other sites More sharing options...
Zebvance Posted December 28, 2012 Author Share Posted December 28, 2012 To the top Link to comment Share on other sites More sharing options...
Zebvance Posted January 15, 2013 Author Share Posted January 15, 2013 Bump Link to comment Share on other sites More sharing options...
Zebvance Posted January 29, 2013 Author Share Posted January 29, 2013 bump Link to comment Share on other sites More sharing options...
Zebvance Posted February 5, 2013 Author Share Posted February 5, 2013 Still for sell Link to comment Share on other sites More sharing options...
jimoshel Posted February 5, 2013 Share Posted February 5, 2013 autoboy454 Jeeper Members 9 posts LocationGranby, MA Posted Today, 07:18 PM As the title states, looking for a rear driveshaft for my 89 SWB 4.0L AW4 4wd Comanche Link to comment Share on other sites More sharing options...
Zebvance Posted February 5, 2013 Author Share Posted February 5, 2013 Thanks Link to comment Share on other sites More sharing options...
Zebvance Posted February 16, 2013 Author Share Posted February 16, 2013 still for sale Link to comment Share on other sites More sharing options...
Zebvance Posted February 17, 2013 Author Share Posted February 17, 2013 Sold! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.