how much for my comanche rocker panels/cab corners?

[itsjust me]

like the title said how much? when i bought my comanche 3 years ago some decent rockers and cab corners came with my truck. they where cut from a to totaled out 2wd and never got installed on my truck. I'm not going to use them and I'm thinking about selling them. i did the magnet test and they seem to be all sheet metal. they need to be cleaned up a little, but they should be good to install. does any one make them anymore? what are they worth?

 

Image Not Found

[FrankTheDog]

Just what I need to fix the rockers on my 92.

Let me know when you figure out a price.

I'll go $100 plus shipping.

[Pete M]

I see rust. what do the insides at the rusty locations look like?

[FrankTheDog]

Also, please show more detailed pics of rust and the back side of the pieces.

[xjrev10]

Just what I need to fix the rockers on my 92.

Let me know when you figure out a price.

I'll go $100 plus shipping.

Exactly what I would personally pay.

[itsjust me]

Image Not Found

 

this is the inside one of the cab corners. can't push a screw driver threw it so it can't be that bad. they are more or less the same on both rockers.

[itsjust me]

Image Not Found

 

the is the worst spot. where the rocker meets the cab corner. the rust all seems to be surface at this point.

[itsjust me]

Image Not Found

[itsjust me]

Image Not Found

[itsjust me]

Image Not Found

[itsjust me]

Image Not Found

[itsjust me]

Image Not Found

[Pete M]

I ask because our trucks usually rust from the inside-out. especially the rockers, floor and bedsides. that to me looks like it started on the inside and is rusting out the seams. :(

[jimoshel]

Would XJ rockers work?

[Pete M]

MJ rockers are different, but I do believe I've heard of XJ sheetmetal being used on an MJ (with some massaging). could be wrong about that though. the cab corner of course doesn't exist on an XJ.

[FrankTheDog]

The tricky part of using XJ rockers looks like tieing the rocker into the cab corner.

Which it looks like I'll be doing.

Those rockers aren't as clean as the two XJ's I'm parting out so I'll

stick with what I have.