jasongreg28 Posted April 16, 2012 Share Posted April 16, 2012 when i turn my lights on my left blinker lights up on the dash not on the outside. I have changed headlight harness & dash harness. what else would cause this? Thanks in advance Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 16, 2012 Share Posted April 16, 2012 That's funny, mine did the same thing until I had to take it out to replace the speedo cable. So I say take it out..........fiddle with it a minute......put it back in.........lol Link to comment Share on other sites More sharing options...
smuth Posted April 16, 2012 Share Posted April 16, 2012 there's a short somewhere in your wiring for either the external turn signal light or the indicator light in the dash, so the indicator think's the light is on b/c power is being drained somewhere Link to comment Share on other sites More sharing options...
Optimaldave Posted April 16, 2012 Share Posted April 16, 2012 Look at the lights at night. I had the same issue and noticed when my headlights were flicked on the left indicator turned on at slight power too. Replaced the blinker socket and the problem was solved. Link to comment Share on other sites More sharing options...
Zenobian_84 Posted April 16, 2012 Share Posted April 16, 2012 Look at the lights at night. I had the same issue and noticed when my headlights were flicked on the left indicator turned on at slight power too. Replaced the blinker socket and the problem was solved. Do you mean replace the whole socket assembly, or just the bulb? Same problem as jasongreg, to a T, and I've been trying to figure out the solution for about a week. :fs1: Link to comment Share on other sites More sharing options...
Optimaldave Posted April 16, 2012 Share Posted April 16, 2012 Look at the lights at night. I had the same issue and noticed when my headlights were flicked on the left indicator turned on at slight power too. Replaced the blinker socket and the problem was solved. Do you mean replace the whole socket assembly, or just the bulb? Same problem as jasongreg, to a T, and I've been trying to figure out the solution for about a week. :fs1: Pull the bulb and take a look. I replaced the whole socket as it costed $5/6 and took maybe 15 minutes to pull the old one and solder in the new. But my socket was visually corroded pretty badly. Link to comment Share on other sites More sharing options...
jasongreg28 Posted April 17, 2012 Author Share Posted April 17, 2012 It is the socket I'm gonna change it tomorrow thanks guys Link to comment Share on other sites More sharing options...
jasongreg28 Posted April 17, 2012 Author Share Posted April 17, 2012 it was the bulb.... the 2 bumps on the bottom of the bulb wasn't bumps... changed the bulb and fixed the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now