Will XJ rubber door weatherstripping fit MJs?

[madmax]

Wondering if I can salvage a driver's side door rubber weatherstripping moulding from a four door XJ and use if on my MJ's driver side door? They look the same. Appreciate any input.

Madmax.

[RynoMJ]

Yep the front doors are the same.

[Dadinator]

Just make sure it's a 4 door.

The 2 doors are longer.

[Pete M]

97+ is a thicker seal and should be an upgrade for ya. :thumbsup:

[Eagle]

97+ is a thicker seal and should be an upgrade for ya. :thumbsup:

'97+ also has an extra wind seal at the upper front.

[madmax]

Thanks for the quick answers!

[dave92cherokee]

For one even thicker than the 97+ look for the door seal from a ZJ, they're thicker and slightly longer so will require trimming.

[Darren]

For one even thicker than the 97+ look for the door seal from a ZJ, they're thicker and slightly longer so will require trimming.

 

Thicker than the 97+? Do you have to slam the door closed? :D

 

Have you actually done this, or are you just assuming it will work?

[dave92cherokee]

For one even thicker than the 97+ look for the door seal from a ZJ, they're thicker and slightly longer so will require trimming.

 

Thicker than the 97+? Do you have to slam the door closed? :D

 

Have you actually done this, or are you just assuming it will work?

 

 

It's a common replacement for the XJ guys through all ranges. The moulding from all doors and hatch from the grands will fit when cut down slightly. So since it works for the xj's and the fronts are the same as the MJ's it would provide even better sealing.