lexluthier72 Posted September 1, 2011 Share Posted September 1, 2011 Hey Folks, This is my first post. I wasn't sure where to post this, but I'm looking for some MJ'ers in Mpls MN. I just bought my first MJ, and she needs body work, and I have no idea how to weld, and do not own a welder! I need a DV side floor pan, rockers, and cab corners! Any help, suggestions etc would be greatly appreciated. Also, Id like to do most of the prep work myself. Thanks in Advance. -Erin (aka lexluthier72) Link to comment Share on other sites More sharing options...
xjrev10 Posted September 1, 2011 Share Posted September 1, 2011 The only one I know on here that is active is neohic but hes over by st. cloud. MJ doesnt look bad for a MN rig! Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 1, 2011 Author Share Posted September 1, 2011 Thanks! I was fairly impressed by the lack of complete rust out, which is one of the reasons I bought it. I just got a probably fair est by a "body guy" to do some of the work, but IF I can save a few bucks, and make some friends in the process....win, win. I am tempted to buy an inexpensive welder, and have a go at it....but figured, Id give a request for some help first. -E. p.s.- Hopefully neohic will chime in....St cloud is only an hour or so away, would not be so bad. Link to comment Share on other sites More sharing options...
AMCJeepMJ Posted September 1, 2011 Share Posted September 1, 2011 Hey welcome lex. Not a bad looking rig if it weren't for the rust... and you're back bumper is relatively straight! Link to comment Share on other sites More sharing options...
Automan2164 Posted September 1, 2011 Share Posted September 1, 2011 Thanks! I was fairly impressed by the lack of complete rust out, which is one of the reasons I bought it. I just got a probably fair est by a "body guy" to do some of the work, but IF I can save a few bucks, and make some friends in the process....win, win. I am tempted to buy an inexpensive welder, and have a go at it....but figured, Id give a request for some help first.-E. p.s.- Hopefully neohic will chime in....St cloud is only an hour or so away, would not be so bad. Might take him a few days. He's moving closer to work, in Alexandria. He starts moving today, and won't have the interwebs for a bit. He's a super nice dude, and always willing to help. You might have gotten really lucky too on the welding part. He is a college welding instructor. Rob. Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 1, 2011 Author Share Posted September 1, 2011 Cool. Thanks Guys! I can wait a while. In the meantime, I'm trying to slow the rust on other parts of the rig with rust inhibitor, and painting. The inside is fairly clean, the overall plan is by next year to give her a fresh paint job :D Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 1, 2011 Author Share Posted September 1, 2011 looks like just a few of us from MN?!? Link to comment Share on other sites More sharing options...
dasbulliwagen Posted September 1, 2011 Share Posted September 1, 2011 Youll need to let this soak for a few days in order for you to get as many replies form people in your area as possible. Not everyone is on everyday, but most who are active will check in at least a few times a week, so don't get discouraged if you don't get answers right away. Good luck on the MJ, and start a build thread! Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 1, 2011 Author Share Posted September 1, 2011 I figured, just anxious! I may have located a guy in the neighborhood (literally) that is currently going to school for welding. Just have to catch him when he is home. What is the general consensus on Cab Corners? Are they still not available aftermarket? Link to comment Share on other sites More sharing options...
xjrev10 Posted September 2, 2011 Share Posted September 2, 2011 looks like just a few of us from MN?!? only a few of us that are active. Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 2, 2011 Author Share Posted September 2, 2011 Guy in the neighborhood did not pan out....turns out he has no welder, and has since switched directions at school....BUT, I did get a call from a body guy who works out of his home, and is willing to only do the welding/smoothing of the welds, and I can do the rest. Cost more than beer, but he is a pro. Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 3, 2011 Author Share Posted September 3, 2011 Welder found who will weld me up for free! Whoo Hoo. :jump: Link to comment Share on other sites More sharing options...
neohic Posted September 7, 2011 Share Posted September 7, 2011 Welder found who will weld me up for free! Whoo Hoo. :jump: Good deal, homie! Keep in mind to practice proper metal preparation otherwise you'll be right back where you started in no time. looks like just a few of us from MN?!? only a few of us that are active. Word... the proud, the few. Like I wrote over in your other thread, Naterenfo1 is a cool kid down in your area. He's up in Alexandria going to school, but I would imagine he goes home from time to time. Might be able to give a hand. Another down there would be 1sickMJ... but I'm not so sure he's comes around these parts anymore. ... He's moving closer to work, in Alexandria. He starts moving today, and won't have the interwebs for a bit. He's a super nice dude, and always willing to help. You might have gotten really lucky too on the welding part. He is a college welding instructor. Rob. Thanks bro-chacho! Indeed, just this past weekend, I moved over to the other side of the state. I'd love to help but we're a bit farther apart now. What I can do is give you some links: Lincoln Electric’s website has “Education Center” section that’s full of awesome information: http://www.lincolnelectric.com/en-us/ed ... rials.aspx Stacy David does a pretty good job too as far as different types of body repair joints: Geez… Stacy David is so cool!!! Any pictures of what you're dealing with? Link to comment Share on other sites More sharing options...
lexluthier72 Posted September 9, 2011 Author Share Posted September 9, 2011 I have not pulled carpet up yet!!! (yikes) I can however see carpet pad from under truck. I did find a guy who is going to do all my welding (apparently he owes my sister a favor) He is an industrial welder, and knew right away what I was talking about and how to get it done up right. Speaking of welding, you have a PM about Cab Corners.... :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now