JEEPER1 Posted February 23, 2011 Share Posted February 23, 2011 i just installed a 4.5in lift with new leaf springs and new coils, and my rearend sits 3 to 3.5 in high if you measure from the top of the tire to the bottom of the fender flare, you also get similar results measuring from level ground to the rocker pannels, the manufacturer says they will settle in the rear in 350 miles , is this an accurat statement or BS? also is there an easy way to either raise the front or lower the back? my installer put the 2 inch pucks on that i had from another build and took them back off becuase of the binding issues. its a lift that is leafs under axle. eric Link to comment Share on other sites More sharing options...
Pete M Posted February 24, 2011 Share Posted February 24, 2011 how was the rear lifted? Is it too high or too low? Link to comment Share on other sites More sharing options...
JEEPER1 Posted February 24, 2011 Author Share Posted February 24, 2011 the rear is high not that i mind it beeing high i just hate a truck that dosent sit level. the kit was bought as a complete 4.5 inch kit the dealer assured me that these kits on a comanche sit level, i really don't care if the front is raised or the rear lowered .,or the front raised a 1 in and the rear lowered 1 in. Link to comment Share on other sites More sharing options...
mnkyboy Posted February 24, 2011 Share Posted February 24, 2011 What kit is it? Link to comment Share on other sites More sharing options...
btm24 Posted February 24, 2011 Share Posted February 24, 2011 You could try front coil spacers. Brandon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now