is there any common reason why ....

[shawn]

.... my gas gauge, brake lights, and tac would all stop working at the exact same time? - maybe washing it wasnt such a good ide after all.

these things all stopped working once before and seemed to fix themselves while i was away.lol.

i have heard mention of a ground behind a tail-light. the electrical in this truck (my blue one) has never been any good or consistent or easy to figure out and i still have that crappy fuse box.

thanx, shawn.

[DJM/78]

Sounds like a loose ground somewhere , possibly in the cab ?

Mine has a faulty ground behind the console that shorts out my door buzzer , console lights , pillar lights all at the same time ... :nuts:

 

Someone should really come up with a painless wiring harness thats actually painless . :dunce:

[MJ is dead]

You have a door buzzer?!? Man, the options my mj doesn't have.... :rotfl2:

[kro10000]

Its really annoying, one of the first things i did was remove that thing

[shawn]

Sounds like a loose ground somewhere , possibly in the cab ?

Mine has a faulty ground behind the console that shorts out my door buzzer , console lights , pillar lights all at the same time ... :nuts:

 

Someone should really come up with a painless wiring harness thats actually painless . :dunce:

 

 

where is that ground? - i have that problem too, but it's a separate issue.

[dasbulliwagen]

In my crappy fuse box, there is a fuse for the cluster that sometimes looses good contact, I just wiggle it a little and they start working again.

[WBKrazy]

In my crappy fuse box, there is a fuse for the cluster that sometimes looses good contact, I just wiggle it a little and they start working again.

 

 

and mine as well..... i wrapped tinfoil around the fuse blades and stuffed it back in, worked for a while

[Backroads]

Sounds like a loose ground somewhere , possibly in the cab ?

Mine has a faulty ground behind the console that shorts out my door buzzer , console lights , pillar lights all at the same time ... :nuts:

 

Someone should really come up with a painless wiring harness thats actually painless . :dunce:

 

 

was that ground bolted to the firewall or where was it?

[DJM/78]

Sorry guys I've been busy . My loose ground is behind the console bolted to the lip at the edge of the floor pan .

It may be aftermarket because of the :dunce: that installed the sound system . Check any bolts with wires running to them .

I had to pull the carpet to get to mine .

[-600JeepMJ]

the cab ground on both my MJ are under the dash just above the brake release.

 

 

 

If you have not done so down load and print out a Electrical Manual here is a like to one a of a few on the web.

viewtopic.php?f=9&t=12734