mfpdm Posted January 17, 2010 Share Posted January 17, 2010 If I had money to spare, I'd pick this up. http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT :cheers: Link to comment Share on other sites More sharing options...
runner6 Posted January 19, 2010 Share Posted January 19, 2010 Thanks for the heads up on this. Just what we needed for our Comanche. In fact, I came home from work early to win the auction. (That may be a sign...) In my rush, I noticed the console was being advertised as 2WD. But aren't they all the same, just the 2WD consoles had an insert rather than the 4WD bezel? I went out and looked at our son's XJ, but he has a full-size console. Our MJ is in the shop about 30 miles away. Anyway, it is mine now. Thanks again! Link to comment Share on other sites More sharing options...
Puritan21 Posted January 20, 2010 Share Posted January 20, 2010 You lucky sun of a gun!! Just kidding! I was going to bid on this and forgot while I was working outside. To answer your question...yes they are the same, you just need to put the bezel in. :cheers: Link to comment Share on other sites More sharing options...
runner6 Posted January 21, 2010 Share Posted January 21, 2010 Puritan21, thanks for the response. Here is a full-size tan console that popped up on eBay. It is ending soon, though. http://cgi.ebay.com/ebaymotors/Jeep-Cherokee-Tan-Center-Console-84-96_W0QQcmdZViewItemQQhashZitem4a9dcbf1c0QQitemZ320474968512QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_947wt_734 These tan ones are hard to find compared to the other colors. Good luck, and thanks again. Link to comment Share on other sites More sharing options...
mfpdm Posted January 21, 2010 Author Share Posted January 21, 2010 Glad to see someone from the forum got it. Nice score. :thumbsup: :cheers: Link to comment Share on other sites More sharing options...
dasbrick Posted January 21, 2010 Share Posted January 21, 2010 does the console just fir right in? or is their massive triming? Link to comment Share on other sites More sharing options...
runner6 Posted January 21, 2010 Share Posted January 21, 2010 dasbrick, which console are you talking about? On the mini-console we bought, we are just swapping out the new mini-console for the old damaged mini-console (this is on our MJ). On our son's XJ, we bolted in a full console in place of the mini-console. No trimming or anything. The front brackets are the same for both consoles, and you just need the rear bracket when you bolt in the full console. On an MJ, I do not know for sure if there is any trimming going from mini to full console. I think it just bolts in as described on the XJ above. Link to comment Share on other sites More sharing options...
Wildman Posted January 22, 2010 Share Posted January 22, 2010 the full XJ console going into an MJ, the lower heater panel on the dash need to be removed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now