papastork Posted March 4, 2009 Share Posted March 4, 2009 ok boys and girls, i need some help here... will the bell housing on a 4 cyl 5spd mj fit a 6 cyl 4.0 engine? Link to comment Share on other sites More sharing options...
mfpdm Posted March 4, 2009 Share Posted March 4, 2009 Nope. The 5spd behind a 4 banger wouldn't last anyhow behind the 4.0 Not unless it has been swapped with an AX-15. Even then the bellhousing would still need to be changed for one from behind a 4.0 :cheers: Link to comment Share on other sites More sharing options...
JeepcoMJ Posted March 4, 2009 Share Posted March 4, 2009 no way, no how, never. you need 4.0 specific parts Link to comment Share on other sites More sharing options...
mjeff87 Posted March 4, 2009 Share Posted March 4, 2009 a bit long in the tooth, but here's the writeup I did on my swap...... http://www.comancheclub.com/forums/viewtopic.php?f=7&t=11205 HTH, Jeff Link to comment Share on other sites More sharing options...
papastork Posted March 5, 2009 Author Share Posted March 5, 2009 thanks. i was afraid that the swap would be a little bit tough. although i do have a 5 spd that came out of a two wheel drive mj. although it's missing second gear.... Link to comment Share on other sites More sharing options...
Pete M Posted March 5, 2009 Share Posted March 5, 2009 Essentially you'll need an entire 4.0L XJ/MJ to accomplish the swap. :( Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now