Jump to content

will it work


Recommended Posts

I'm tryin to find a 4l engine for my brother in law cherokee, and was wondering if a 92 4l cherokee engine will work in a 96 cherokee. if not any one know what will work in the 96.

Link to comment
Share on other sites

I'm pretty sure 92 was OBD-I, federal govenrment madates that all vehicles 96 and newer need to be OBD-II.

 

So yeah, computer probably will be different,

 

I'm guessing the engine itself is the same, but you may possibly need to swap some of the sender units over from the old one.

 

I really know nothing specific about the HO, as my only experience is with the Renix (87 through 90).

Link to comment
Share on other sites

yea, the 92 motor will work.

 

you'll have to swap alot of things from the 96 motor over that you can

 

you need

96 flywheel/fledplate

distributor (for safe measure though 92 may work)

throttle body and sensors

coolant sensors

oil pressure sending unit

02 sensors (not sure if this is 100% necessary swap)

fuel rail and injectors (not 100% necessary, but a good idea)

 

the most important thing I can tell you to swap is the flywheel/flexplate. we recently installed a 93 motor in a 95 xj after rebuilding the motor, and found that the flexplate was different and would not bolt up to the torque converter AFTER we installed the motor :roll: so we had to take it out and swap out the flexplate :( which just cost us time.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...