Search the Community

The time has come for real deal release of the long awaited Krustyballer sliders, bumpers and hitches! Contact Brandon to order your parts. *A $100 DEPOSIT TO PURCHASE MATERIALS IS REQUIRED BEFORE ANY PART WILL BE MADE* Mounting hardware is not included with the sliders or bumpers. You can reuse your stock bolts but they really should be upgraded to grade 8. SLIDERS SWB available in 2"x4" slider (pictured below) and 2"x3" (should have pictures soon) WITH STEP--$335+ shipping WITHOUT STEP--$305+ shipping WITH STEP PLATE--$375+ shipping LWB WITH STEP--$360+ shipping WITHOUT STEP--$330+ shipping WITH STEP PLATE--$400+ shipping XJ SLIDERS ARE AVAILABLE NOW AS WELL!!! WITH STEP--$335+ shipping WITHOUT STEP--$305+ shipping WITH STEP PLATE--$375+ shipping when ordering, make sure you specify what size slider, with or without step and SWB/LWB REAR BUMPERS STANDARD-64" long 2"x4", 2" receiver, 2 d-ring shackle mounts $300+ shipping minus $15 for no 2" receiver minus $15 for no d-ring shackle mounts . Weld on DIY rear bumper brackets. $65 plus shipping. Front bumpers are coming FALL 2019! They will be available in a few different designs as well. You can order them with or without the brush guard or with or without the integrated hitch. Also will have winch bumpers available. HITCHES $225+ shipping (more info in the Hitch thread in the for sale section) I will try to answer any questions on here or through PM if anybody has any. **DISCLAIMER ***If you purchase a fully built hitch, rear bumper or set of sliders, i accept NO responsibility or liability on any of them. once shipped, any failure or problems with performance due to misuse is the buyer's responsibility. Once anything is installed I accept NO responsibility or liability. For liability purposes, hitches and bumpers are not load/weight rated. I cannot say that these can be used to pull or recover. if done so, this falls under misuse of the product and I am no longer liable. Thanks, Brandon S.

Hi all, Thought I'd give a write up a shot, and I've been meaning to post one about my experience working with and installing @krustyballer16's custom sliders. Working with Krusty was a breeze, and he was quick to send pictures and answer any questions. While there weren't any instructions, it is very straight forward, and all of the hardware is shipped along with a drill bit for the frame. It took about 3 weeks for the sliders to arrive after placing the order, which worked out perfect with my Thanksgiving travel plans. It's 50% upfront for the materials, and 50% before the sliders are shipped out. The came taped together with the nuts, bolts, and drill tip. We cleaned them up and removed off the excess tape and residue from the packaging, then lined them up on the frame for install. We used a grinder to get to the bare metal on the frame before making our marks. Each slider is 8 bolts, and you have to drill through the frame. There are several additional screws that go through a few tabs and into the cab's flanges down below. We lined up the holes with a jack then drilled through. In the meantime I added a couple layers of primer, followed by some paint. Then we realigned the sliders, tightened the nuts and bolts, and had a 360 weld done around the base plate of each slider arm. They are great quality, I'm extremely happy with my purchase. They are also the very first set of LWB sliders Krusty has done, and I couldn't be more impressed!