RynoMJ

Well day 3 still zero profess I tried stu's way drilling two holes and chiseling it out no luck. There's just no separation between the collar and the shaft.

I've heard of the grease for the pilot bearing but that will work for the collar too?

So reading through That it does need to come out. What a pain this is going to be

Not sure which one you're referring to but I haven't been able to find any information on it.

I'm swapping in an aw4 into my 88. I removed the pilot hearing from the back of the engine. Does the bushing that the bearing sits in need to come out? It doesn't look like it can.

I mustve not been paying attention when I bought my AW4 but I'm looking for the bracket that mounts to the transmission that the shifter cable goes into. I also need the shift lever. #14 #16

That's the thing I just re did the floors really not looking to do them again. Guess I should've found the leak first. Thanks for the reply's guess its going to be some trial and error here!

I have a pool of water on my passenger foot area. I've been looking for the past few weeks here. Thought it was a window seal. But i cannot for the life of me determine where the water is coming in from. Rained all last night and all the seals seem dry. Where do these things usually leak from?

Thanks for the reply really appreciate it. It's looking like I need to find a renix automatic throttle body since mine doesn't have a spot for the cable to attach.

I'm thinking it must be different because I don't see any pivot points on the throttle cable lever. Anyone with a Renix know?

I'm getting all my bearings straight to do an AW4 swap in my 88 replacing the BA10. I'm going with an electronic shifter since I cannot locate a harness that will work. The last thing I cannot seem to figure out/see is where the throttle valve cable from the AW4 will hook up to my throttle body. Will I need to locate a different body? Any body have a picture of how this connects to the throttle. Thanks.

Long shot but I'm looking for a gauge cluster to swap in so I can get rid of my idiot lights. I have an 88 so I believe I need an 89 or 90. Not looking to give eBay the going rate of $135.

I was looking to go on the 18th if anyone is around.

In for Rausch whenever!

Logans metal products. Relatively cheap compared to a lot of other bumpers. I'm not sure what I was thinking putting a stock one back on it. Thanks bud.

Little update. So I chose that front bumper because I knew at some point I wanted to attempt to put a winch behind the cross member. Finally got around to fabing the mount and getting everything to line up. I like the hidden winch look.

I'm in.

Lol agreed. I've kind of noticed that too

Absolutely. Do you go to any of the meets?

Jeep looks good Nick!

Thanks! Theres probably an 1/8 of space between the corner and the bumper.

Figured I'd give a little update: Sliders Had a little mishap in the driveway late one night. So I ordered a JCR bumper and put it together with a few modifications Image Not Found Image Not Found

Going wheeling anytime soon?

.

Mods can go ahead and delete this thread. Thanks.