Jump to content

Aussiemj

Members
  • Posts

    86
  • Joined

  • Last visited

Everything posted by Aussiemj

  1. Hi everyone my 1990 4 litre 5 speed has a broken transmission lug mount . Can I use rear case from a yj or does have to be xj/Mj part thanks paul
  2. 2 inch lift is what i have got and will did install a drop brkt mainly for strength it just seams the sway bar is not wide enough with the jks disconnects.
  3. hi guys this problem is on my xj not my mj but I thought i would throw it out there. my xj has two inch lift and the say bar disconnects hit the track bar holder and the sway seems to be 50mm to narrow. does anyone now the dimension of the overall width of a sway bar thanks
  4. All my brake lines are rusted and the nut have seen better days. has any one used classic brake lines as they list Mj on there site. paul
  5. Hi everyone What is this hole used for in the driver side front chassis rail. As you can seen the steering box has destroy the rail thanks paul
  6. Thanks
  7. Hi guys My oil pressure gauge not working on my 1990 truck. Is this right sender Paul
  8. That a indicator light to say you have unlock or lock your doors normally the indicators Paul
  9. Hi everyone Does 91 + xj steering drag link and tie rod fit a 1990 mj https://www.ebay.com.au/itm/393005578416 This seem to be cost effective Paul
  10. should i remove the pins
  11. hi everyone just pull doors off the 1990 mj just one broken weld which i going to fix with t& m door frame strengthen. But the hinges are flog with wear in the pins. What to do ? thanks
  12. I have not remove windscreen yet so trim pins are still there. If I use a 94 +rubber do I reuse the trim. Thanks
  13. Hi everyone I want repaint the Mj. So I want pull out the front screen. My Mj has a trim around the windscreen. What windscreen rubber should I use thanks
  14. My dash is bit tatty with broken mounts. Can any one suggest where can buy one. Please remember I am in Brisbane Australia Thanks
  15. Hi guys The previous owner has change the front dif to a solid diff (remove select trac)but has left the piping to the transfer case. Can I remove this plumbing. What problem will I have. What else should I do. Thanks
  16. Could you please add me thanks
  17. Try dirtbound they make one
  18. You have fender and trunks we have guards and boot
  19. The black wire thing or the negative terminal that what we call the earth in Australia
  20. Aussiemj

    How many

    Hi guys as i am importing a Mj into Australia just wondering how many here. I know there was one other that was converted to the I think in Victoria.
  21. To change do I need any new parts?
×
×
  • Create New...