Muncher

I'll have to look into it a little.more

I do not have one. But I already have a speedo gear to match my pattern. But how would I check spline count?

Yes that's what I did and that's the only way high beams would turn off but low beams wouldn't go on still

So I'm messing around with my lights again today and when I push on the high low beam switch it turns the high beams off but doesn't turn the low beams off. And also pulling the stalk back does not turn them off completely only pushing the button it self works. Do I jusy need to replace that high low beam switch ?

I just put in the fuse cable and I had one small wire on the distributor block that I missed

So I was looking around the other day and saw a np242 transfer case online. Is it hard to swap one of these into a already 4x4 comanche or is it even worth it to do.

Currently storage for 8 tires a v8 I found in the ocean and other various metal boxes 😂

Hey you would be the guy I'll be messaging once I get one😂

That would be good. Let me know when your coming up here cause my luck for bench seats doesn't look very well.

looking for a headrest bench seat. I'm in rhode island

man thats got a head rest bench seat i looks like. i wish i could pull that

Jusy got all my cables in and it's running good. Just got some newish tires off a wj that are alot nicer than my current wheels. Think they might even be a little bigger also

Got it back and running thanks guys

https://www.ebay.com/itm/233911841155

That's a good one🤣

Oh ok. I know I put the alternator wire on there and the one from the positive terminal to it. There was a couple of other ones on there 2 but ill see tommrow if there's any loose ones.

There's just one positive on the starter though ir are you talking about something else ?

Usualy it does. But now I jusy have power inside and when I turn the key nothing happeneds

Starter is brand new.

Thinking maybe a bad neagitve battery cable ground but at the same time I do have power in the cab so I'm not sure

Oh ok thanks

Oh ok. What are the two settings on the light switch for then? And also I have the led lights in mine nkw but even with the old lights low beams didn't work either.

What about jusy the normal light switch though when I pull it to low beams ?