Master7122

Looking to purchase factory rubber floors for my comanche unless someone knows of a link to a new one i could buy.

Thanks everyone! I’m gonna take the blower motor out and attempt to rebuild/oil everything. I’ll have one on stand by at the parts store just in case

So recently my truck started making this squealing noise behind the glovebox. It only happens when the heat is on, once i turn it off it’ll stop. I turn the heat back on and no squeal until about 5-10 mins and then it starts making the nose again. Wondering if anyone knew what this could be before i start taking the dash all apart. Thanks in advance

Interested

Thank you! I’ll see if the seller will ship

Looking for a factory swb roll bar, closer to northern Illinois the better

Sweet! Thank you! I will most likely go this route

Just replaced my floors and am not sure what to coat them in to protect them. I was thinking por-15 or bedliner and then something along the lines of dynamate as an insulation. Anything cheaper to use then dynamate?

If you needed the front I had some extras but don’t think I have rears

Front or rear bumper end caps?

Thank you guys, I pm’d him so hopefully he’ll get back to me

If anyone has an extra tailgate handle laying around and feels like letting it go, I’ll buy it. Haven’t had one for about a year now and I’d like to make a life alittle easier and be able to open my tailgate

I'm be going to pick up a comanche this weekend and it has the ba10-5 but the owner said reverse just grinds. He said the trans had reverse, then went mudding and now doesn't. Any clue what could of happened or possible fixes?

And the year is 87' its rust free that's why I'm considering buying it

Just the 2.5, I've had 4 other Comanches with the 4.0 so I'm very familiar with them, just never had one with the 2.5

I might be buying a comanche with a 2.5l and just wanted to know what some common problems or things to look for are before getting it. It has 85k miles and is 2wd 5 speed

I have a knocking or clicking noise when I brake at low speeds (20mph and under) it stops when I'm at a complete stop, it also does it when turning but only sometimes. Its 4wd and it is coming from the front of the truck

Looking for a brake proportion valve from a Comanche, tried one from a Cherokee and didn't quiet work

I'll go out and buy a tension gauge and check it out, I thought it was already tight enough but maybe not??

Once it starts its constant, it will happen as soon as I hit operating temp, 140-180°ish. It gets louder as I give it gas and the more I drive it the louder it squeaks. It evently will stop at a certain pitch of squeal

Not that I can recall, I cleaned the idle puller when I replaced the belt but it did the same thing before I did anything

My serpentine belt only starts to squeal when the engine reaches around 150° or around operating temp. I put a brand new belt on it a couple days ago and it still does it. The belt was a gates so it wasnt to cheap. It starts off quiet then gets worse as I keep driving

Thank you, exactly what I needed

I need the measurement from the back wheel arch to the end of the bed on a short bed Comanche. I'm getting a custom bumper made but I have a long bed and would like this bumper to be used on a short bed as well

Not sure where you are located but there is a 86 Cherokee in the junkyard by me, complete 2.5l, manual trans and 4x4. Its at the blue island lkq in Illinois, zip code is 60406