asm4mcc

this worked thanks for the info

i just replaced my 4.0 motor with just a 4.0 and i think i messed up the injector wiring any help would be great?

i want to swap my renix for a h/o motor can any one tell me what i all need i got the engine and wiring

has been a long time but i got the comanche done and since i rolled it and just blow it up in a big mudd hole sumthin blow a hole in the oil pan but i still made it through the hole but now I'm looking for a stock motor the 4.88s work great with the 36x12.5 15x10 rims and also added a snorkel

h/o 4.0 block with renix intake will it look? has any done it? what is invovled?

hi i have a chevy 350 and have a 89 comanche with ax15 and if i put that 350 in what do i do about the motor mounts and what do i do about a tranny

it was lose bell houseing bolts

well i just put my tranny in and drove it around for like 3 days and then it started making a noise when i push the clutch in all the clutch parts are brand new also this is my first m/t swap thanks 97 ax15

umm i really don't kn o

i jus don't understand how it works the bench only has 2 sliders and the comanche floors brakets are small then the cherokee

ok but i f'ed up i jus cut those pliugs right off so i need to kno what color there are

I'm just goin to the junk yard tomorrow

my clutch line is cut at the slave cyclinder with an inch sticking out how to i go about run a clutch line and what do i use

i swap aw4 to ax 15 yea i need to kno what colos the two wires are

ok i got everything to go just need to bypass the neutural saftey switc h how and what do i do

umm april 3 11am in shamokin meeting at the plates at the 3rd patch where u from

april 3 treverton and shamokin there will be a huge trail ride starting at 11am sat it is to help raise money for a girl will be a great time tons of trails and big mud holes

well i got the tranny in and the rears put back in just replaceing the ball joints then jus goot to figure something out with running a clutch line and hopefully everyt thing will work

that might explain why they won't cum out thanks

i need to replace both lower ball joints, i got the top ones out with a ball joint press but the bottem ones won't cum out please help

i kno it can be done and it would be great if someone could give me a link for how to swap them with some good pics thank you

yea I'm not to far from there ill do some wheelin

WELL STILL DIDNT GET THE TRANNY IN I HAD THE WRONG BUSHIN BUT GOT THE RIGHT NOW WITH THE FLYWHEEL BOLTS AND CLUTCH BOLTS SO HOPEFULLY I CAN GET IT IN THIS WEEKEND BUT I STILL NEED A TRANNY MOUNT BRACKET. AND WAITING FOR MY REARS TO COME BACK FROM GETTING THE 4.88S PUT IN

SOUNDS LIKE A GOOD TIME I DEF GONNA TRY TO MAKE IT THERE THIS SUMMER WITH MY COMANCHE YORK AIN'T TO FAR AWAY I'm 8 MILES FROM SHAMOKIN IN LOCUST GAP

I HAD THE SAME PROBLEM IT WAS MY CPS ON THE BELL HOUSING