Jump to content

KSjeepguy88

Members
 View Profile  See their activity

  • Posts

    56

  • Joined

  • Last visited

 Content Type 

Everything posted by KSjeepguy88

  1. KSjeepguy88
    I sold the 2014 rubicon wheel. And got my new raceline 81 17x9.5 beadlocks put on the Comanche today. It's looking good nice!!!
  2. KSjeepguy88
    Got my dirty30 built and installed over the last 2 weeks!
  3. KSjeepguy88

    Jeep Ink

    KSjeepguy88 replied to Spectormj's topic in The Pub

    @ramblinringo has one!
  4. KSjeepguy88
    Ok. I lost track on this build... I now have everything on my MJ 6.5" iron rock off-road from coils. Rough country Long Arms. JCR 1-ton OTK steering. Ford 8.8. With 4:10s LSD, IRO 8.8 swap kit/truss, solid diff cover. BillStein 5100 series shocks. IRO trac bar. 2" coil front spacer (to make it level) 2014 rubicon wheels (17") 285/75R17 treadwright guard dog tires 5on4.5 to 5on5 wheel adapters Big thank you to @ramblinringo for helping me do all the work on my comanche.
  5. KSjeepguy88
    On my 88 MJ 4.0l, my idle is very high and I can't find out why... I've cleaned the Throttle body and IACV, replaced some vacuum lines and adjusted the TPS... I don't know what else to do to see if I can get the idle lower, but to replace the IACV. Thanks for the input
  6. KSjeepguy88
    Mine is the 4.0l auto with NP231
  7. KSjeepguy88
    My drivers side mount was in 2 peaces. The passenger side mount on my truck was all one peace but it was dry cracked and old.
  8. KSjeepguy88
    I work at a local auto parts store, I was looking through our system and found a bigger filter that fits the 4.0ls Stock filter: wix 51626 New filter : wix 51182 They both have... 21 micron rating M20x1.50 thread 2.462" gasket inside diameter. 3.663" bottom outside diameter The ONLY difference is the "51182" is 5.207" tall and the stock "51626" is 3.812" tall Hope this helps someone someday...
  9. KSjeepguy88
    If the CPS was bad it would not start at all! It would not send a signal to the ECM telling where the crank is at in its rotation, check all your vacuum lines and maybe your idle air control valve
  10. KSjeepguy88
    This is where I mounted my CB on the back of my center console
  11. KSjeepguy88
    I'll keep that in mind. Thanks guys!
  12. KSjeepguy88
    I'm going to go look at it in person Friday morning, I hope I can use the track bar and brace, and the rear shackles
  13. KSjeepguy88
    Yea I know he got the lift from a friend and he blew the motor in his XJ before he could get the lift on it
  14. KSjeepguy88
    I found a guy on Craigslist that's selling this 6" lift off an XJ and I can't find out what brand it is. Any help?
  15. KSjeepguy88
    Here is where I mounted mine, under the tool box used firestik mount and antenna. Out the CB radio on the bad side on my center consul
  16. KSjeepguy88
    Me and @RamblinRingo are just finishing up prepping our MJ's for Sunday!!! You all better be there! find us and say hello too
  17. KSjeepguy88
    Tires in the bed... Just wish they were on the axles!!!! I'm going to do a SOA swap on the rear and 6.5" coils, and long arms in the front. Should sit very close to level, I hope to have it all on and done by the first of the new year!
  18. KSjeepguy88
    This is what my drivers side motor mount looked like when I took it out, Got the new ploy inserts in and no more sound!
  19. KSjeepguy88
    Got my tires mounted on my 2013 JK wheels today! Now to get this 2" boost on for the time being...
  20. KSjeepguy88
    Got my new motor mounts, now I just need to get them in
  21. KSjeepguy88
    I did mine about 2 months ago Turned out great I think!!!!
  22. KSjeepguy88
    I already have 5on4.5 to 5on5 lug adapters I plan to do a SOA in the rear and 6.5" springs up front so sounds like I'm going to just wait a month or 2 and get all my lift ready then put it all on. Thanks for the input
  23. KSjeepguy88
    So I have 2" spacers and a rear add-a-leaf sitting in my garage but do you think some 285/75R17s on 2013 wrangler sport wheels will fit on my MJ with the 2" quick boost? Just want my MJ on some tires now!!!
  24. KSjeepguy88
    It's back on for the 3rd of November.
  25. KSjeepguy88
    It's working great! Hahahaha
×
×
  • Create New...