blusteve

Doing the 97+ fronend conversion, sheetmetal is going on fairly easy, but am wondering the best way to wire the headlights, turn signals and side markers. Can I use the old harness and splice the extra wires needed? Any help will be appreciated.

have a grey bench seat with brackets in good shape, can take pics, out of my 91 located in S. Indiana

Know it is a hard item to find, but looking for a rollbar for my 91 swb comanche. Live in S. Indiana. Any help would be appreciated

20,000 lbs.

Picked up a doghouse and doors for a front end conversion on my 91 shortbed. Doghouse looks to be a fairly easy swap-unbolt and bolt on new sheetmetal. Found a thread for headlight wiring so that will help. My question is how to use the doors frpm the 2001 on the 91. The new doors are power windows-etc. and the wires are cut. What can I do to make them work. Any help will be appreciated.

where is the best place to buy the plastic inner fenders for a 91 comanche, mine are brittle and broken. Will 97 and up fit? are they still available?

Thanks, just what I need

does anyone have a picture of how the jack and handle fit behind the seats. I took mine out about a year ago and do not remember how it goes back in.

do you have his # to call, how are the floors

FUEL PUMP VOTE ALSO---

yes, I have a set that I am asking $450 for so that price is a good deal

have a chance to buy a rust free 90 comanche 6 cyl. auto, I know most parts I need to swap, but will a 231 bolt up to the tranny or is a different output shaft needed also will I need a 4wd crossmember

nice tank where did you get it and approx. cost?

I think it is a 904 chrysler tranny

I think it is called school bus yellow

two questions- lifted jeep 3.5 inches need to adjust trackbar to work with lift since I will use this as a DD only can I just drill a new hole for adjustment. Also, swaybar is very rusted and pitted-is there any simple upgrades or shold I just get one from a cherokee. My comanche is a 91 with skid plate :banana:

finished installing fron springs and shocks sits a little low in front have 3.5 hellcreek rears and 3.5 Rubicon Express fronts wiil see if rears settle if not will use ACOS to level

Orig. paint? looks great, x2 on the floorboards. Very nice comanche any plans

Think JB Weld would work? What was he doing?

Looked at it again today, too sick to work on it.

Its April edition, so it April Fools Day release-they do it every year.

Removed my battery tray today and found a large rusted area where battery acid had eaten the metal, large hole. What is the best way to repair, will cherokee late model inner fenders fit, if so can these still be bought from MOPAR. My commanche is a 91

Does anyone have a good source for the plastic fender liners that fit in the fender wells and covers access to the door channel, etc.

Have a 91 that has broken and brittle splash shields, looking to replace the. Saw ones for cherokees on Ebay will they work or does anyone have any suggestions?

What is the difference in the TJ vs. Mj Front coil springs is it height difference or size(round)