HKB3

http://baltimore.craigslist.org/cto/3972493351.html

Guess no one repairs the rust on the inside....

When I did mine I swapped the linkage from the donor XJ, it's been a few years so I do not remember if I had to modify anything else.

I'd be happy just to find a stock black bumper in great shape.

2 door XJ bed side patch panel trimmed to fit 2 door XJ outer wheel house

None of the pics in that link work. I already have the XJ sheet metal, the XJ is not the same as a Comanche. I was able to use the bed side sheet metal but the wheel house is not even close and I don't have an English wheel and/or planishing hammer to fab up one not to mention time. pics to follow

Looking for red interior pics I found this: Nice body/paint, the suspension & wheels not so much

Looking for a full console preferably in maroon/cranberry or what ever its called. Like this:

Looking for ideas to repair/replace/modify/something the outer wheel house. I have a patch panel for the bed side ready to go. I am not sure what I want to do to attack the outer wheel house(the sheet metal between the bed side and the inner bed.) mine has Swiss cheese rust. Right now my options are: 1) continue patching what I have, although I don't like the idea of all those seams 2) modify something from another vehicle to fit, less welding/less seams 3) remove it completely, the only problem I see with this is no support/bracing for the bed side. Looking for ideas from what others have done so post them up.

It is "Cummins" btw. And a 6bt would be a 12valve pre 98(in a dodge) IMO I would steer far away from any 6.0L ford unless you know it's complete maintence/repair history AND it has had the egr cooler and head gasket issues taken care of. For dodge make sure you go over the front end with a fine tooth comb, you will also want to have the injector pump checked especially if you are looking at a truck with the vp44 pump. And look for rust on the dodges also, the doors and rockers like to rot.

In Maryland you have to be a licensed dealer or go through a broker to buy from copart.

How? The fuel tank is mounted inside the frame rail. I am not saying a LWB tank will fit into a SWB but the tank is nowhere near coming in contact with the tire. I looked at doing this myself when I replaced my fuel tank but I needed the use of my truck so I just went with a stock replacement tank.

I'll be there Saturday

http://www.autotrader.com/ATCarID/AT-14DBEEB1?LNX=IOSEMLVDP&dealer_id=606368&car_id=349957809 Pics on mobile site http://m.autotrader.com/vdp.html?id=349957809

Just snapped a pic