87sparTruck

Nah, just one pic through the door window and all you see is the headrest.

http://longisland.craigslist.org/cto/4727971962.html 1987 jeep Comanche.let me start by saying I don't need to sell it! This is more or less a feeler post. If I get offer the right number of sell it. 87 Comanche body -fully plated (engine bay,front rails face and bottom, mid plates that tie in to rockers) 1/4" rockers made from 2x12 tube shaved cab mounts (flat from rocker to rail) Partially Eco caged all 1 3/4 Dom Engine is a 4.0 tranny is a ax15 (5speed) and wire harness is out of a 96 Xj with 125k on it Transfer case is out of a 2004ish rubicon (4to1 low range) tom woods driveshaft. Axles -front is a waggy 44 with 5lug outers -ten factory alloy shafts 4.88 gears and a full spool. Tnt truss also has PSC hydro assist . Rear is a ford 9in custom back braced and plated with 4.88 gears and a full spoil 31 spline with Yukon shafts. Front suspension is 3.5 RE coils with rock krawler long arm. Rear is spring over stock leafs but I frenched the front mount 3" in to frame to get a 3" lift instead of 6" Shocks are fox 2.0 resi custom valved front and rear. 35" bFG KM2's lil less then half tread Interior has 2006 WRX seats with custom brackets. Dash is out of 96 cherokee. New carpet Asking 8000 obo. Don't offend me and lowball me I will simply not answer you. Serious inquiries only . I've spend a lot of money and time building this truck don't want to sell it but testing the waters.

89 jeep Cherokee 4.0 5 speed it runs and drives with a 3" lift kit on 31 x 10.5 Mikey Thompson mtz. It has a hd track bar, new ball joints last year. Brand new clutch, flywheel, slave cylinder, clutch master cylinder last Oct. Then the Jeep caught on fire and burnt the passenger side of the dash, the headliner, and cracked the windshield. It dose still start just the vacuum is now really messed up so the front axle doesn't engage low dose work it is just 2wd only right now. It is titled an AMC and an oddomiter discrepancy so it reads 99999999 miles. The seats are rocking ones and I have another set of seats from a 96. I also have an extra rear hatch some lights and grill parts. 900 obro let's be realistic here the tires alone a year ago cost me $900 mounted and I didn't even put 5k on them the rest is perfect for parts if u already own a jeep like I said it dose start up and still drive. http://worcester.craigslist.org/cto/4701283597.html

(Not mine) i have a aw4 transmission looking to get 250.00 obo w.o transfer case its in good working condition just was rebuilt 4000 miles ago motor went and scraped the jeep borla headers 75.00 firm rear end from Comanche 50.00 need to get rid of asap call me show contact info trades are welcome http://providence.craigslist.org/pts/4709345335.html

Thanks. It's been 9 years in the making... So far lol

Probably not. Would it be worth it if the truck were free?

"He has" an 89 jeep comanche for trade. It has the 4.0 motor but one of the freeze plugs popped. both axles are junk but have new ones to put in. its a 5 speed shortbed which is rare. its a 4x4. this is a project/mud truck. will not pass inspection. will need to be winched onto a trailer since the axles won't turn. has a 3 inch teraflex lift on stock tires. looking for car trailers, another jeep, wrangler, winch, grand cherokee, 5 speed cars. let me know what you have the worst i can say is no. $650 obro. http://nh.craigslist.org/bar/4665967695.html

Selling a '94 Jeep Cherokee 4.0 5-speed 4x4 parts vehicle. Was in the process of installing new floors, but decided body was too far gone to be worth finishing. Complete driver, passenger and rear cargo floor pans partially installed. Needs significant work on the spring and control arm mounts + rockers + quarter panels + various holes patched. Decided to sell it as a parts vehicle. The interior is complete and in very good shape - but is not installed in the vehicle. The engine starts and runs great, the clutch is good as is the transmission and transfercase. Many good parts to fix your project Cherokee or Comanche. $500 Firm for the entire thing + interior. http://providence.craigslist.org/cto/4701197778.html

1991 Jeep Comanche Strd Cab 2-Dr 2x2 - $3000 (not mine) 1991 Jeep Comanche title status : clean Beautiful well maintained 1991 Jeep Comanche. Hard to find this year and in this condition, they only manufactured a little over 5000 in this year. Everything works, even the crank spare tire system under the box.

Not mine... Price is firm. Used but still in pretty good shape. Rubber Queen - Drop in Tub - bed liner for Jeep Comanche with 6 foot bed. 2 pieces - bed liner and tailgate liner. Easy Installation. http://hartford.craigslist.org/pts/4631386754.html

http://providence.craigslist.org/cto/4620765051.html (not mine) Hi I have an 87 JEEP Comanche I started building no rot 5 inch lift 33" tires custom roll bar and push bumper/ brush guard it has 99 cherokee dash seats doors console and i have engine and trans and wirring to do complete swap but have not had time to complete and I am moving to florida so I need to thin the herd. Thanks if interested call Nick

I have a 304 and auto tranny, but sadly I'm a little far from you.

http://westernmass.craigslist.org/pts/4589751787.html "I have a tailgate for a 1986 Jeep Comanche 4x4 other parts available"

I guess if someone wants it, they'll have to ask the owner what it was mounted to previously and use some comparison pictures from the internet, etc.

http://newhaven.craigslist.org/pts/4635074334.html I have a Lund visor for a jeep cherokee or Comanche. These are very hard to find and are rare! Painted black now but paint to match your jeep. These are rare . $225 obo don't contact me if you don't want it . Emails only I will reply.

Like a carter carb from an amc 232 maybe?

Did you sand all the paint out, or did you just abrade it to make a surface for it to cling to? Yes, definitely. I didn't rough it up and pieces fall off daily. Now I have to redo it.

Found a set up in Maine-http://maine.craigslist.org/pts/4613048412.html

I posted this as well lol No interest in this is shocking.

http://newlondon.craigslist.org/pts/4555199709.html for sale: jeep comanche bed side ... driver side , from a rust free truck that was "tee-boned" , can be used for 6' / 8' beds , cut just before the corners / end of box ... NO RUST ! try to find another ! $150.00 call / text ! thank you ! PRICE REDUCTION ... FIRST $100 .00 !!!

:agree:

Awesome. I will put up some pictures of mine when it stops raining this week here.

http://washingtondc.craigslist.org/doc/cto/4516835954.html

Any more progress so far? I've made some progress with mine and I'm hoping to sell off a bunch of my extra parts this summer at the AMC Shows here.