Buffalo Man Posted 23 hours ago Posted 23 hours ago Hello everyone. My ba10/5 slave cylinder kicked the bucket, so it's time for the ax-15 swap. I got one, and it definitely needs help. I'm posting this thread to sort of catalog my progress. I've never done a transmission anything before, let alone rebuild one... But times are hard and I don't have any option but to learn new things. I got the transmission down to the intermediate plate ... Been following the Novak video, but after reviewing this part over and over, I am still clueless as per why the intermediate plate won't break free. Every bolt (2 long 8 short) and snap ring (2) is out as stated on their video, but I found there was a second snap ring on the main shaft the video didn't mention, and still it stays ever so slightly cracked, and wiggles from one side to the other. What is stuck? I literally can't imagine what would be there because I have no clue about any of this. Prepare for a long thread of help me. I'm in over my head lol
87MJTIM Posted 23 hours ago Posted 23 hours ago You sound like me many years ago. My BA10 had gone through 5 internal slave cylinders. It wasn’t getting a sixth. There are videos on YouTube that show how to take apart and rebuild an AX15. The presenter is”UCanDoIt2”.
Buffalo Man Posted 20 hours ago Author Posted 20 hours ago I beat the #### out of it with a rubber hammer. That did it.
Eagle_SX4 Posted 19 hours ago Posted 19 hours ago One tip is to use a 2 bolt puller on 5th gear when pulling it off. Don't use a jaw puller you will likely chip the teeth like I did last month when I rebuilt mine. Also All State Gear has the best prices on parts and they are great quality. https://www.allstategear.com/Jeep-AX15-5-Speed-s/1989.htm
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now