Pete M Posted February 6, 2023 Share Posted February 6, 2023 part number checks out with what the manufacturer says it goes to, but those ports are definitely not in the exact same location (even thought hey are spaced apart from each other the same) and that interferes with the plastic on the hvac box. did I get a 97+ or something? Link to comment Share on other sites More sharing options...
ghetdjc320 Posted February 6, 2023 Share Posted February 6, 2023 Not sure which one you got there. However, if your going to return it, get the plate and fin design vs the tube and fin. Four seasons makes a nice plate and fin that fits with slight mods. Done a couple now that way and it works great Link to comment Share on other sites More sharing options...
AZJeff Posted February 7, 2023 Share Posted February 7, 2023 Where did you source that evaporator? ( It's not a 97+ XJ type, BTW.) Link to comment Share on other sites More sharing options...
Pete M Posted February 7, 2023 Author Share Posted February 7, 2023 amazon. technically I didn't order it. but I did find it and send her the link. the overall size is good and the ports are good, just a bit off in location. Link to comment Share on other sites More sharing options...
Pete M Posted February 7, 2023 Author Share Posted February 7, 2023 this one: https://www.amazon.com/Evaporator-Core-Compatible-Jeep/dp/B09S41YQ8Y Link to comment Share on other sites More sharing options...
Pete M Posted February 7, 2023 Author Share Posted February 7, 2023 I'm probably just going to trim the plastic a bit. the tubes will fit out the firewall just fine and I was planning on replacing that gasket with a custom cut piece anyway. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted February 7, 2023 Share Posted February 7, 2023 1 hour ago, Pete M said: I'm probably just going to trim the plastic a bit. the tubes will fit out the firewall just fine and I was planning on replacing that gasket with a custom cut piece anyway. I have plenty of leftover oem gasket material if you’d like some. Link to comment Share on other sites More sharing options...
Pete M Posted February 7, 2023 Author Share Posted February 7, 2023 hoping to just grab some at Hobby Lobby tomorrow. if I fail I'll let ya know. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now