Warren99 Posted June 28, 2022 Share Posted June 28, 2022 Installing long arms soon, for cutting the lca mounts, is it safe to just use an acetylene torch to cut the majority of them off, or is that bad and at risk of warping the unibody frame or something? If I have to I'll just go through 10 cutting wheels but the torch would be easier. Link to comment Share on other sites More sharing options...
Pete M Posted June 28, 2022 Share Posted June 28, 2022 I used a sawzall and just sliced along the frame. Link to comment Share on other sites More sharing options...
Warren99 Posted June 28, 2022 Author Share Posted June 28, 2022 How was that? I imagined a sawzall taking forever, and probably longer than a zis wheel on a 90 grinder. Link to comment Share on other sites More sharing options...
Pete M Posted June 28, 2022 Share Posted June 28, 2022 I mean, they both work. but no, I wouldn't take a torch to them when slicing/grinding is needed anyways. I just can't see it saving any time. Link to comment Share on other sites More sharing options...
Warren99 Posted June 28, 2022 Author Share Posted June 28, 2022 alright thanks! Link to comment Share on other sites More sharing options...
ghetdjc320 Posted June 28, 2022 Share Posted June 28, 2022 The metal there is quite thin. There are lots of small pieces that will need to be cut but they cut very easily with a disk Link to comment Share on other sites More sharing options...
Warren99 Posted June 28, 2022 Author Share Posted June 28, 2022 I'll end up just using a combination of both then. Link to comment Share on other sites More sharing options...
.thumb.jpg.00f6632c078db322a1ff1364dda7d8c7.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now