ktmall07 Posted November 22, 2021 Share Posted November 22, 2021 Hey all, I just noticed the past few days that when I first start the truck up, at idle there is kind of a sputter/choking until I give it any throttle, and a major sputter when I first give it throttle until about 1/2throttle, after which it runs fine. After the truck heats up, the problem seems to go away. Could this possibly be the fuel pump failing or struggling due to the cold? I should mention, there is no problem starting up, and no other symptoms, just that the engine seems starved in the cold. Any other possible culprits? Link to comment Share on other sites More sharing options...
Pete M Posted November 22, 2021 Share Posted November 22, 2021 vacuum leak that goes away once the engine bay warms up? Link to comment Share on other sites More sharing options...
ktmall07 Posted November 22, 2021 Author Share Posted November 22, 2021 Do you know of a good write up on where each of the million possible vacuum leaks are located? Haha Link to comment Share on other sites More sharing options...
Pete M Posted November 22, 2021 Share Posted November 22, 2021 I would start with firing it up cold and while it's struggling I'd wiggle vacuum lines around, especially the MAP sensor line. then the next time I'd try spraying some throttle body cleaner around. if it is a vacuum leak, it'll get sucked into the engine and the RPMs will change. before that though, when is the last time you cleaned the throttle body? could just be the idle controller is sticking. Link to comment Share on other sites More sharing options...
cruiser54 Posted November 23, 2021 Share Posted November 23, 2021 Make sure your intake manifold bolts are snug. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now