billyblankss Posted March 10, 2021 Share Posted March 10, 2021 I was wheeling this weekend and this hose came loose and now I don't know where to reconnect it. It's attached to the back of the differential. My brain is not helping me figure it out from the maintenance manual pdf. Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted March 10, 2021 Share Posted March 10, 2021 It is for venting the front axle, originally attached to the left upper control arm, and I believe was wire tied up in the engine compartment out of the way of the manifold Link to comment Share on other sites More sharing options...
SatiricalHen Posted March 12, 2021 Share Posted March 12, 2021 Just stick it as high as you can in the engine bay with some zip ties. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Dzimm Posted March 12, 2021 Share Posted March 12, 2021 Yup as stated it's the breather hose for the front diff. Make sure it has the cap on the end of the hose still, if it doesn't just get a tiny air filter to go on it so air can circulate and crap can't get in. Tie it up as high as it will go. I'd also recommend taking the hose off completely and running some compressed air through it to get anything out that may be in it since I'm guessing it was dragging along the trails. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now