JStone Posted February 22, 2021 Share Posted February 22, 2021 It drives me WILD that is is missing, I have no parts or pieces of the old, just a couple holes in the side. Help a brotha out of ya can! Link to comment Share on other sites More sharing options...
500 MJ Posted February 22, 2021 Share Posted February 22, 2021 What mirror style are you looking for? There were quite a few different choices available... Link to comment Share on other sites More sharing options...
eaglescout526 Posted February 22, 2021 Share Posted February 22, 2021 Is yours just blocked off by a cover? Entirely possible it had mirror delete. Link to comment Share on other sites More sharing options...
JStone Posted February 23, 2021 Author Share Posted February 23, 2021 Driver vs passenger. I hate the Asshat who drilled more holes in this to probably try and mount a different mirror, THEN TAKES IT OFF and replaced with what was once orange duct tape! hahah just gotta laugh. also..decent small hole patch ideas?! Link to comment Share on other sites More sharing options...
BeatCJ Posted February 23, 2021 Share Posted February 23, 2021 Best way to do it is to plug weld the holes. But that's going to create a lot of work. Link to comment Share on other sites More sharing options...
JStone Posted February 23, 2021 Author Share Posted February 23, 2021 On 2/23/2021 at 1:28 PM, BeatCJ said: Best way to do it is to plug weld the holes. But that's going to create a lot of work. Expand I don’t mind the work too much, as long as the repair is solid and looks purtty! Do plug welds paint nicely? She’s gonna get a coat sometime later this year Link to comment Share on other sites More sharing options...
BeatCJ Posted February 24, 2021 Share Posted February 24, 2021 At that point, it paints like any other metal. Basically, you fill the hole with weld metal, and grind it smooth. Obviously, it's way more involved than that. Link to comment Share on other sites More sharing options...
Recommended Posts