ASmith94 Posted April 30, 2020 Share Posted April 30, 2020 Does anyone know the name or the part number of the small floor suport connecting from the inner rocker to the middle frame. I believe it's the same on cherokees as well but was replaced with that box tube looking one that their seat mounts to. Any help would be greatly apreciated! Link to comment Share on other sites More sharing options...
fiatslug87 Posted April 30, 2020 Share Posted April 30, 2020 It looks like it comes as one piece with the one that runs front to back (9). Link to comment Share on other sites More sharing options...
Minuit Posted April 30, 2020 Share Posted April 30, 2020 I call it, depending on how official I feel, either the "sideways triangle floor thing" or the "transverse floor brace" It's spot welded to the uniframe rail through the floor pan around the edge in several places. I strongly doubt you can get a new one, but you should look under it if you haven't to see if there is rust hiding underneath. Link to comment Share on other sites More sharing options...
ASmith94 Posted April 30, 2020 Author Share Posted April 30, 2020 I had to rip the floors up all the way to the back wall of the cab. Wish I save the sideways triangle bit because I think it was the only salvageable part 😅 Link to comment Share on other sites More sharing options...
OldSch88L Posted May 15, 2020 Share Posted May 15, 2020 While on the subject, I'm pretty sure all the Comanche specific parts are discotinued, but is the trans tunnel the same as an XJ? If so, are reproductions available? All I can find is XJ floor pan sections Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now