eaglescout526 Posted September 28, 2019 Share Posted September 28, 2019 Round two. Front suspension pieces. Sway bar. 4 of the 24mm and 3 of the 28mm are available. All bushings are available. One clamp left 11 clamp bolts left. 14 sway bar link bolts left. 123 sway bar links left. Still orderable. Goes in a couple different places. Sway bar link washers still orderable. Sway bar bushing still orderable. Sway bar link top nut. 160 left. 40 track bars left. 1 sway bar bolt left. Washer still orderable. Still orderable. I think I ordered this once and it didn't have the bar to hold the nut when you remove the bolt. 7 cotter pins left 17 castle nuts left Still orderable 1 left M10 1 left. M12 still orderable. 14 left of the M10 and 3 of the M12 left 4 left This number is very much broken. It supersedes to a magnetti marelli number but chances are the dealers still have the Mopar numbers. PM me to check all numbers and if you need me to check for a part that comes in the shock kit Coil spring. 2 left 3 coil springs left. Don't ask me what the coded means, I can't tell you what it means for I don't know. 1 coil spring 2 coil springs 2 coil springs 3 coil springs 1 coil spring 2 coil springs 3 coil spring holders/brackets left 13 left 8 left Top one still orderable. Bottom number there are 50 left. Bushing still orderable. Lower control arm still orderable Bushings still orderable 1 left 1 left Still orderable Still orderable Still orderable 15 left 14 left 10 left That's all front suspension Link to comment Share on other sites More sharing options...
JMO413 Posted September 28, 2019 Share Posted September 28, 2019 Good work! I hate to think how many times I have looked through the whole catalog! Link to comment Share on other sites More sharing options...
eaglescout526 Posted September 28, 2019 Author Share Posted September 28, 2019 I'm amazed with how many coil springs are still floating around. But yes hopefully this will eliminate the need to constantly go back and forth. Link to comment Share on other sites More sharing options...
schardein Posted September 29, 2019 Share Posted September 29, 2019 How much does a 28mm sway bar run? Link to comment Share on other sites More sharing options...
Old man with MJ Posted September 29, 2019 Share Posted September 29, 2019 How would someone who doesn't work at a dealer go about ordering these parts, I could use the 28mm bar and cushions also? I would probably get a not available if I tried! Thanks Link to comment Share on other sites More sharing options...
eaglescout526 Posted September 29, 2019 Author Share Posted September 29, 2019 5 hours ago, schardein said: How much does a 28mm sway bar run? About $200. Might cost less if ordered through vintage parts. 29 minutes ago, Old man with MJ said: How would someone who doesn't work at a dealer go about ordering these parts, I could use the 28mm bar and cushions also? I would probably get a not available if I tried! Thanks Well, what I have been doing is folks would PM me and I would provide a few dealers info and I would then leave it to you to give a dealer a call and talk to them over the phone. Most of these dealers are happy to sell you parts over the phone and out of state. Unless you are the one dealer in PA who won't ship anything out of state. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.