Will 3" lift in front and 2" in rear look right?

[jrl3]

So I have some OME 2930 springs with the jks acos in front for what I think should be 3" with acos fully compressed.  

 

In the rear I'm getting GS Metric Ton military wrap leafs, supposedly good for 1/2" over stock (new leaf height).  And rocky road shackles good for 1.5".

 

Am I going to install this and have a reverse rake going on or should it be pretty level?

[shelbyluvv]

You should be fine. Most new springs sit a couple inches higher than advertised when new. With the shackle you should not have any rear squat for a long time.

[Jeep Driver]

I have the same springs and the ACOS.

 

You are going to be surprised at just how much the rear lifts. 

 

You'll likely be adjusting the ACOS to the rear height. 

[jrl3]

Great, thanks guys, just what I was hoping to hear.  Its a SWB if that matters too.

 

Any idea if jk wheels with adapters would fit ok? With the stock 17" size @ 255/75/17 tires.  ~32"  I have some really nice recon wheels I'd love to use on it.

[Jeep Driver]

26 minutes ago, jrl3 said:

Great, thanks guys, just what I was hoping to hear.  Its a SWB if that matters too.

 

Any idea if jk wheels with adapters would fit ok? With the stock 17" size @ 255/75/17 tires.  ~32"  I have some really nice recon wheels I'd love to use on it.

32s on GS standard springs.

 

This is before the military wrap springs.......now sitting 1.25 inches higher.

 

But, I cut......you may not have to. 

 

 

[zomeizter]

Hey Driver, are them there flares Bushwhacker? Ima be cutting into my wells soon and would like something like your setup...