Fitting YJ 2.5l Exhaust Manifold onto MJ

[Swampy]

For those of us that still love our 4 screaming squirrels, here is a little necessary upgrade/Egr Delete

The manifold I used was from a 2.5l yj ( a knock off pacesetter header from ebay)  Header Link and EGR Block off plate

 

 

There are going to have to be some modifications, the new mid pipe is shorter than the original, so you can either lengthen your new mid pipe or lengthen youe existing exhaust set up if you are going to reuse it

  

 

It is short about 1-1.5 ft, so it gives you the opportunity to run a new exhaust if you want

[Pete M]

did you use the original crossover pipe?  it seems that it'd be too low.  

[HOrnbrod]

19 hours ago, Pete M said:

did you use the original crossover pipe?  it seems that it'd be too low.  

 

Looks like Won Hung Lo got it wrong - again.... 

[Swampy]

On 5/21/2018 at 9:46 PM, Pete M said:

did you use the original crossover pipe?  it seems that it'd be too low.  

 

It hung low because i hadnt fully tigthened the bolts before taking the picture. It was difficult to tigthen and hold a pipe that wants to fall on your face at the same time