JeepFanactic Posted August 5, 2017 Posted August 5, 2017 About to order a new driveshaft for my 87 MJ. I did the 4wd conversion with the AX-15 and transfer case from a 1998 XJ. My MJ is only lifted 3.5 inches. Will there be any vibrations with this lift and transfer case setup? What is recommended for this setup? Thanks
MuddFoot Posted August 5, 2017 Posted August 5, 2017 I don't think you have to have a sye. 3.5 inches is not much on an MJ. Sent from my Z981 using Tapatalk
Alexia Posted August 6, 2017 Posted August 6, 2017 I have 5.5" on my short bed without a SYE. However, I did have to adjust the rear axle pinion angle a few degrees. There are pinion angle shims available from various companies for about $20.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now