89 Comanche project

[Elijah808]

Howsit! I have a 87 Comanche that I'm building all stock 2.5L 4spd. I also have an 89 Comanche that is a straight 6 with a 7inch lift 8.25 rear end with locker. The 87 has a rusted can and the 89 is super clean. I know it's unibody but has anyone done or knows anyone that has done a cab swap

[mnkyboy]

I've seen the cab and unit frame separated on an MJ so it can be done, but it would be much easier to swap everything from one truck to the other.

[Elijah808]

This is the 89

[Elijah808]

And the 87.

[Elijah808]

I've seen the cab and unit frame separated on an MJ so it can be done, but it would be much easier to swap everything from one truck to the other.

Guess I'm gonna have to choose then. Or just weld new floor plans and roof into the 87

[Fernando87mj]

[Elijah808]

[dano669]

Hey, could you part with the tailgate?

[Elijah808]

Hey, could you part with the tailgate?

I actually have another tailgate on my parts truck if you want that one

[Elijah808]

Anyone know where this red wire should be?