Jeepjeff859 Posted July 16, 2015 Share Posted July 16, 2015 ok so today i got my clutch kit and the only thing that doesnt fit is the pilot bearing. i ordered a 1993 clutch kit and its to big. i found the bearing at autozone but it doesnt include the sleeve for the bearing to be pressed into and then into the back of the engine. Does any know of a bearing i can order (.586 inside diameter i think because the one i got is .75) that will fit the sleeve for a 1994 engine ? Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 16, 2015 Author Share Posted July 16, 2015 Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 16, 2015 Author Share Posted July 16, 2015 Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 16, 2015 Author Share Posted July 16, 2015 Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 16, 2015 Author Share Posted July 16, 2015 something i just though about is..... is can i get the bearing without the sleeve and pound it into the second race on the back of the engine ? Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 16, 2015 Author Share Posted July 16, 2015 So I'm guess my problem is that I'm using a grand Cherokee engine because the 4 outta 6 bolts line up Link to comment Share on other sites More sharing options...
88whitemanche Posted July 16, 2015 Share Posted July 16, 2015 Keep turning the flywheel until they all line up.... That happened to me when I did my ax15 swap... And I had to take off the flywheel to get the original pilot bearing out Link to comment Share on other sites More sharing options...
Rockfrog Posted July 17, 2015 Share Posted July 17, 2015 Looks like you have an 89/90 era AX15 ... They had a smaller Pilot diameter vs the 92 and later which were .75" Pilot. Not sure what you need to do there, check advanced adapters for a bushing, I think they have one (was about $10 last I recall). I know a CJ V8 Pilot is used with pre 95 4.0s and a later AX15. But you are adapting the other way. Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted July 19, 2015 Author Share Posted July 19, 2015 http://www.advanceadapters.com/products/716120--pilot-bearing-590-id-x-1818-od/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now