CGCWO Posted June 15, 2015 Share Posted June 15, 2015 So the plug on the back of my fan speed control is getting hot if the switch is in the higher speed positions. I have had it apart and cleaned the connections. Anyone have any ideas? Link to comment Share on other sites More sharing options...
Jeep Driver Posted June 15, 2015 Share Posted June 15, 2015 Could be the blower motor itself and or the resistor. Link to comment Share on other sites More sharing options...
cruiser54 Posted June 15, 2015 Share Posted June 15, 2015 Or the ground for the blower motor is not good. G103. Driver's side inner fender. Notorious for having too much paint under the terminal and being held on with an old sheet metal screw. Refresh it. Link to comment Share on other sites More sharing options...
CGCWO Posted June 15, 2015 Author Share Posted June 15, 2015 Thanks guys, I'll give Cruisers suggestion a try first. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now