Jump to content

Power steering swap


Recommended Posts

The pump should even fit the bracket thats already there.

 

The 2.5l uses a remote fluid reservoir on the core support, the 4.0l pump has the reservoir mounted to it. Either will work but the 4.0l pumps reservoir may interfere with the factory air box setup.

Link to comment
Share on other sites

 Either will work but the 4.0l pumps reservoir may interfere with the factory air box setup.

 

Yup, I just converted a manual 87' 2.5L TBI MJ to power steering.  My donor was a 95/96' 2.5L XJ from the JY.   I tried using a 4.0 renix PS set up, it can be made to work but it will interfere with the airbox...if you ditched the airbox and used a cone type air filter I imagine it would work okay.

 

You won't need the steering shaft.  The boxes are the same length.  Get the pitman arm.  The manual pitman arm will not fit the PS box...its too small.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...