91Pioneer Posted January 4, 2014 Posted January 4, 2014 Wanted: Rust free cab corners. Both sides. Preferably cut from the pinch weld seam at the bottom/back up a few inches above the bottom of the door, maybe higher. To fix this type of thing:
Kkilmer87 Posted January 4, 2014 Posted January 4, 2014 Ill have some next week what are u looking to spend
91Pioneer Posted January 5, 2014 Author Posted January 5, 2014 Not sure, I have no idea on the going rate... anyone have suggestions? I'm hoping they're in good enough shape that I can cut out the old metal and weld these in without too much trouble... I'm a newbie welder. I guess worst case I'll take them to a body shop :-) Is it possible to cut out the rocker plus a foot or so of the rocker under the door? I dunno, maybe that's too tricky...? The corner is the important part because you can't buy replacement panels like you can the rocker. The passenger side needs some rocker too... p.s. I hate rust.
Kkilmer87 Posted January 5, 2014 Posted January 5, 2014 Well I saw the truck a month ago and looked good from what I remember and ill cut it any way you want
91Pioneer Posted January 5, 2014 Author Posted January 5, 2014 I should just need the corners and not the rockers. Pics would be great, both sides.
Kkilmer87 Posted January 5, 2014 Posted January 5, 2014 My email is kk02108@gmail.com email me so we can keep in touch and I can cut it how u want
87Warrior Posted January 5, 2014 Posted January 5, 2014 Not sure, I have no idea on the going rate... anyone have suggestions?.No real help, but I did buy a rust free longbed and cab corners from a guy in AR for $300. He cut the corners out with a plasma cutter. Be sure to request 3x more metal than you think you'll need. I bet that rust creeps up further than you anticipate.
91Pioneer Posted January 9, 2014 Author Posted January 9, 2014 I need to "pause" my wanted request just for a bit...
91Pioneer Posted October 11, 2014 Author Posted October 11, 2014 OK, time to bump this thread back up. Looking for rust free cab corners and rockers.
91Pioneer Posted October 12, 2014 Author Posted October 12, 2014 Ultimately this is what I'm hoping to get, something like this (full rocker & corner):
91Pioneer Posted October 13, 2014 Author Posted October 13, 2014 Kkilmer87, do you have the full meal deal like shown in the pic?
ScottJeep Posted January 3, 2015 Posted January 3, 2015 Really need to get me one of those battery powered recip saws....
MJ-90 Posted January 8, 2015 Posted January 8, 2015 I have a set that go up to the first body line. Rockers are still attached, one is in good shape and the other rocker has rust pins holes from when the pieces got blasted. Both corner pieces are in good shape.
91Pioneer Posted January 9, 2015 Author Posted January 9, 2015 MJ-90, I'm interested. Have you got a photo? PM or post it here. Thx.
Recommended Posts