TheDude Posted December 14, 2013 Posted December 14, 2013 I may need a new throttle body.. Someone had replace the factory torx screws on my idle position sensor with cheap Phillips head screws that broke off in the body when I tried to remove it to clean the Throttle body.
TheReverendBill Posted December 14, 2013 Posted December 14, 2013 I have a throttle body core in central pa (altoona) if that'll help. send me a mesage if your interested
carnuck Posted December 18, 2013 Posted December 18, 2013 Note that early std trans ones don't have the bracket for the TVS cable or the holes for it to screw into..
HOrnbrod Posted December 21, 2013 Posted December 21, 2013 Throttle Valve Switch :bs: It's the throttle valve (TV) cable, not the TVS cable. TVS stands for Thermal Vacuum Switch, used in the air cleaner housing of 80's and earlier carbed vehicles, including Jeeps.
TheDude Posted December 21, 2013 Author Posted December 21, 2013 Is that the cable from the throttle to the pedal?
TheDude Posted December 22, 2013 Author Posted December 22, 2013 Oh. So I just need to make sure it's from a manual trans then? Or can I just swap the bracket?
HOrnbrod Posted December 22, 2013 Posted December 22, 2013 What are you looking for? The accelerator peddle cable? If so, the TV cable is not that cable.
TheDude Posted December 22, 2013 Author Posted December 22, 2013 I just need the throttle body itself. The screws for the TPS broke off in it when I tried to remove it for cleaning..
Recommended Posts